Garmin G3X Touch Pilot's Manual page 73

V ADJUSTED FOR TRUE AIRSPEED OR MACH NUMBER
NE
(OPTIONAL)
The airspeed indicator can optionally be configured to display V
airspeed or maximum Mach number (MMO). This is useful in aircraft where true
airspeed or Mach number must be kept below a certain limit. If configured, the G3X
Touch PFD can calculate an adjusted V
which will cause the displayed value for V
red band is used between the TAS or Mach limit and the actual indicated value for V
VSPEED REFERENCE
Vspeed references including V
custom Vspeeds can be configured from the Aircraft Configuration Page, refer to the
G3X Touch Installation Manual for more information.
When airspeed is present, the Vspeeds configured are also displayed at their
respective locations to the right of the airspeed scale, otherwise the Vspeeds are
displayed at the bottom of the airspeed indicator.
190-02472-00 Rev. D
NE
V Adjusted for True Airspeed
ne
, V , V , V
NE no so
Garmin G3X Touch
Flight Instruments
based on TAS or Mach in addition to IAS,
to be reduced at high altitudes. A solid
NE
(indicated airspeed)
V
ne
TAS or Mach limit
, V , V , V , V , V
s1 fe a x y Yse
™ Pilot's Guide for Certified Aircraft
adjusted for true
NE
, V , V , as well as several
g r
.
NE
51