Garmin G3X Touch Pilot's Manual page 265

If the number of Traffic Advisories on the traffic display decreases and then increases,
a new voice alert is sounded. The traffic voice alert is also generated whenever TIS-B
service becomes available. The traffic voice alerts are as follows:
• "Traffic"—TIS-B/ADS-B traffic alert received.
• "Traffic Not Available"—TIS-B/ADS-B service is not available or out of range.
Enabling/disabling the traffic alerts:
NOTE: Traffic alerts are reset to 'enabled' on the next power cycle.
1) From the Traffic Page, press the MENU Key.
2) Touch Alerts to toggle between Enabled and Inhibited.
T W
RAFFIC ARNING
The Traffic Warning Window is shown, when the ADS-B receiver issues a traffic
advisory (TA). The Traffic Warning Window shows a small pop-up map in the lower left
corner. The Range Rings on the pop-up alert are spaced every whole mile/kilometer/
nautical mile.
DISPLAYING TRAFFIC DATA
Traffic is displayed by default on the Map Page and in the Traffic Warning Window.
Traffic Symbol and Traffic Label (i.e., relative altitude, altitude trend and absolute
motion vectors) settings selects the maximum range at which traffic labels or symbols
are shown. Traffic Labels can also be turned off.
Traffic information is also displayed on the PFD when Synthetic Vision is enabled.
See the 'Additional Features' Section for more information.
Enabling/disabling traffic data on the Map Page:
1) From the Map Page, press the MENU Key.
2) Touch Traffic.
Customizing traffic data on the Map Page:
1) From the Map Page, press the MENU Key.
2) Touch Set Up Map.
190-02472-00 Rev. D
W
INDOW
Garmin G3X Touch ™ Pilot's Guide for Certified Aircraft
Hazard Avoidance
243