Garmin G3X Touch Pilot's Manual page 53

1) Touch the Page Navigation Bar on the MFD.
2) Touch the Info Page from the Select Page menu.
NEW LOCATION
The 'New Location' menu option on the Info Page is used when the GPS Receiver
is having trouble finding the satellites it expects to be there.
Entering a new location:
1) From the Info Page, while the unit is searching for satellites, press the
MENU Key.
Touch New Location.
2)
3) Touch Automatic, Use Map, or Use Identifier.
4) After selecting your approximate position using the map or entering an
identifier, touch Enter .
5) The GPS Receiver will begin a new search based on the location entered.
ACQUIRING SATELLITES
When the receiver is in the process of acquiring enough satellite signals for
navigation, the receiver uses satellite orbital data (collected continuously from the
satellites) and last known position to determine the satellites that should be in view.
"Acquiring Satellites" is indicated as the solution until a sufficient number of satellites
have been acquired for computing a solution.
When the receiver is in the process of acquiring a 3D differential GPS solution, "3D
GPS Location" is indicated as the solution until the 3D differential fix has finished
acquisition.
190-02472-00 Rev. D
Garmin G3X Touch ™ Pilot's Guide for Certified Aircraft
System Overview
31