Carbon Monoxide (Co) Detector (Optional) - Garmin G3X Touch Pilot's Manual

Additional Features
8.11 CARBON MONOXIDE (CO) DETECTOR
(OPTIONAL)
NOTE: Refer to the approved Pilot's Operating Handbook (POH) for emergency
procedures.
If a carbon monoxide (CO) detector is installed, the current CO measurement in parts
per million (ppm) can be displayed in the Data Bar.
Displaying the current CO measurement in the Data Bar field:
1) Press the MENU Key twice.
Touch Setup > Data Fields > Change....
2)
Touch one of the Data Bar fields.
3)
Touch CO PPM from the list of data fields.
4)
Carbon monoxide levels are recorded in the G3X Touch data log file as well.
In the event high CO levels are detected, the CO data field will flash yellow (if
displayed) and a CO LEVEL CAS Message is displayed.
CO Data Bar Field (High CO)
If the carbon monoxide (CO) detector is inoperative, a CO FAIL CAS Message is
displayed.
290
Garmin G3X Touch
CO Measurement In PPM
Data Bar
High CO CAS Message (PFD)
CO Detector is Inoperative
™ Pilot's Guide for Certified Aircraft
190-02472-00 Rev. D