Garmin G3X Touch Pilot's Manual page 419

• Provides quick access to relevant communication channels and
emergency checklists
ACTIVATING SMART GLIDE
NOTE: Smart Glide is armed, meaning it is available for activation, after
passing through 1,000 feet above ground level (AGL) after takeoff. Up until
that point Smart Glide cannot be armed. Smart Glide remains armed and
available for use throughout the remainder of the flight until the aircraft
descends below 200 feet AGL. The Smart Glide Button is subdued when
Smart Glide is not armed.
Activating Smart Glide:
Press and hold the Direct-To Key for two seconds.
Or:
From the Main Menu, touch Emergency > Smart Glide.
Or:
Touch the Emergency Data Bar Button (if displayed) > Smart Glide.
(Refer to previous section to display the Emergency Data Bar button.)
Or:
Press the optional Smart Glide discrete switch (if equipped).
Note: If the Smart Glide Discrete Switch is installed, the GTN Direct-To Switch will not activate
Smart Glide. The G3X Touch Direct-To Switch will activate Smart Glide with or without the
Smart Glide discrete switch installed.
190-02472-00 Rev. D
Garmin G3X Touch ™ Pilot's Guide for Certified Aircraft
Appendix F
397