Table of Contents
Advertisement
9.1 Using the core temperature
sensor
The core temperature sensor measures the
core temperature of the meat. When the meat
is at the set temperature, the oven turns off.
There are two temperatures to be set:
• The oven temperature. Refer to the table
for roasting.
• The core temperature. Refer to the table
for the core temperature sensor.
CAUTION!
Only use the core temperature sensor
supplied with the oven, or genuine
replacement parts.
1. Set the oven function and the oven
temperature.
2. Put the point of the core temperature
sensor (with the symbol
handle) into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket on the top of the
cavity.
Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
When you use the core temperature
sensor for the first time, the default core
temperature is 60 °C. While
you can use the knob for the temperature
to change the default core temperature.
The display shows the symbol of the core
temperature sensor and the default core
temperature.
4. Press
to save the new core
temperature, or wait 10 seconds for the
setting to be saved automatically.
16
ENGLISH
The new default core temperature is
displayed during the next use of the core
temperature sensor.
When the meat is at the set core
temperature, the symbol for the core
temperature sensor
temperature flash. The signal sounds for 2
minutes.
5. Press any button or open the oven door
6. Remove the plug of the core temperature
7. Turn off the oven.
Be careful when you remove the tip and
plug of the core temperature sensor. The
core temperature sensor is hot. There is
a risk of burns.
on the
Every time you put the core temperature
sensor in the socket, you need to set the core
temperature time again. You cannot select
the duration and end time.
When the oven calculates the provisional
duration time for the first time, the symbol
flashes in the display. When the calculation
ends, the display shows the duration of the
cooking. Calculations run in the background
during the cooking and the duration value in
the display is updated if necessary.
You can change the temperature at any time
during the cooking:
1. Press
flashes,
2. Use the knob for the temperature to
to stop the signal.
sensor from the socket. Remove the meat
from the oven.
WARNING!
:
• one time - the display shows the set
core temperature; if desired, it can be
modified within 5 seconds.
• two times - the display shows the
current oven temperature.
• three times - the display shows the set
oven temperature; if desired, it can be
modified within 5 seconds. This info is
available only during the heating up
phase.
change the temperature.
and the default core
Advertisement
Table of Contents
