Table of Contents
Advertisement
HWP & HWT SERIES
4.
Reinstall drain plug before filling the engine with fresh oil.
5.
Fill the oil to the maximum oil mark. Check the oil level by reinserting the
dipstick without rethreading it.
6.
Reinstall the dipstick and tightly fasten it.
NOTE
HWP150 oil capacity is: 350ml.
HWP270, HWP370 and HWT370 oil capacity is: 600ml.
DO NOT OVERFILL.
SAE10W-30 is recommended for general use. Other viscosities may be
used based on the average temperature range as shown in '3.1 Checking
the Oil'.
MAX. LEVEL
MIN. LEVEL
33
Advertisement
Table of Contents
