Call A Preset; Set A Patrol - HIKVISION iDS-9000HQHI-M8/S Series User Manual

7. Click Apply to save the preset.
8. Optional: Click Cancel to cancel the location information of the preset.
9. Optional: Click

3.6.3 Call a Preset

A preset enables the camera to point to a specified position such as a window when an event takes
place.
Steps
1. Click on the quick settings toolbar of the PTZ camera's Live View.
2. Click in the lower right corner of Live View to set the preset.
3. Select the preset No. from the drop-down list.
4. Click Call to call it, or click
preset to call it.

3.6.4 Set a Patrol

Patrols can be set to move the PTZ to key points and have it stay there for a set duration before
moving on to the next key point. The key points are correspond to the presets.
Steps
1. Click on the quick settings toolbar of the PTZ camera's live view.
2. Click Patrol to configure patrol.
Digital Video Recorder User Manual
in the lower right corner of Live View to view the configured presets.
Figure 3-12 View the Configured Presets
in the lower right corner of Live View, and click the configured
Figure 3-13 Call Preset (1)
Figure 3-14 Call Preset (2)
36