Table of Contents
Advertisement
2.2 Configure Image Parameters
You can customize image parameters, including day/night switch, backlight, contrast, and
saturation in Camera → Display .
Image Settings
Customize the image parameters including brightness, contrast, and saturation.
Exposure
Set the camera exposure time (1/10000 to 1 sec). A larger exposure value results in a brighter
image.
Day/Night Switch
Set the camera to day, night, or auto switch mode according to time or the surrounding
illumination condition. When the light diminishes at night, the camera can switches to night
mode with high quality black and white image.
Backlight
Set the camera's wide dynamic range (0 to 100). When the surrounding illumination and the
object have large differences in brightness, you can set the WDR value to balance the brightness
level of the whole image.
Image Enhancement
For optimized image contrast enhancement that reduces noise in video stream.
2.3 Configure Camera Parameters Settings
You can configure the camera parameters, including day/night mode, supplement light mode, etc.
Steps
1. Go to Camera → Display .
2. Select a camera as your desire.
3. Edit name in Camera Name.
4. Configure the parameters.
Signal Switch
Switch the 4 MP or 5 MP signal from Signal Switch. 4 MP 25/30 fps and 5 MP 20 fps are
selectable. The 4 MP 25 fps and 4 MP 30 fps signals are self-adaptive for the camera.
Enable Defog
Check Enable Defogto enable the defog function of the selected camera. And set the Defog
Levelfrom 1 to 4.
Day to Night Sensitivity/Night to Day Sensitivity
Digital Video Recorder User Manual
20
Advertisement
Table of Contents
