Caution Before Operation - JUKI DDL-900BB Cautions For Safety

PRECAUTIONS TO BE TAKEN SO AS TO USE THE DDL-900BB
1. Neither open the pulley cover nor touch the parts inside the pulley cover with the
power remained on in order to prevent accidents due to electrical shock.
1. Do not operate the sewing machine with the pulley cover and the finger guard
removed in order to protect against personal injury.
2. Neither place fingers, hair and/or clothes nor put anything in the area near the
thread take-up lever while the sewing machine is in operation in order to protect
against personal injury due to entanglement.
3. Keep fingers away from the thread take-up cover and the needle when turning the
power on in order to protect fingers and hands against injury.
4. To avoid personal injury, turn OFF the power switch when you tilt the machine
head.
5. The hook rotates at a high speed while the machine is in operation. To prevent
possible injury to hands, be sure to keep your hands away from the vicinity of the
hook during operation. In addition, be sure to turn OFF the power to the machine
when replacing the bobbin.
6. So as to avoid personal injuries caused by abrupt start of the machine, turn OFF
the power switch and ascertain that the sewing machine does not run even if
the starting pedal is depressed when performing such works as inspection or
adjustment of the sewing machine, cleaning, threading, replacing the needle, etc.
7. So as to avoid electrical shock hazards, do not operate the machine with the power
supply earth wire removed.
8. So as to avoid electrical shock hazards and accidents caused by damaged
electrical components, be sure to turn OFF the power switch before inserting/
detaching the power plug.
9. So as to avoid personal injuries caused by abrupt start of the machine, turn OFF
the power switch when leaving the sewing machine table.
10. So as to avoid personal injuries caused by abrupt start of the machine, turn OFF
the power switch when the electricity fails.
11. To prevent fires, periodically draw out the power plug from the plug socket and
clean the root of the pins and the space between pins.
12. The motor does not produce noise while the machine is at rest. To avoid possible
accidents due to abrupt start of the machine, be sure to turn OFF the power to the
machine.
13. Be careful of handling this product so as not to pour water or oil, shock by
dropping, and the like since this product is a precision instrument.
14. In a domestic environment this product may cause radio interference, in which
case the user may be required to make corrective actions.

CAUTION BEFORE OPERATION

WARNING :
To avoid malfunction and damage of the machine, confirm the following.
• Clean the sewing machine thoroughly before using it for the first time.
• Remove all dust collected on the sewing machine during the transportation.
• Confirm that the voltage and phase are correct.
• Confirm that the power plug is properly connected.
• Never use the sewing machine in the state where the voltage type is different from the
designated one.
• The direction of rotation of the sewing machine is counterclockwise as observed from the
handwheel side. Be careful not to rotate it in reverse direction.
MORE SAFELY
vi