Changing The Password For Your Plc Network - Hercules ePlug 200 Multi Manual

Hercules ePlug 200 Mini

3.7. Changing the password for your PLC network

In order to communicate with each other, the adapters in your PLC network must all have the same password.
- In the Advanced settings tab, enter the new network password in the corresponding field.
- Tick the Apply the password to all devices on the network box.
If you tick the Apply the password to the device connected to the PC only box, the
adapter connected to the PC will no longer be part of the network.
- Click Change the network name.
- In the warning window, click
- Make a note of the network name, then click Close.
28/72 – User Manual
.
Hercules ePlug 200 Multi