How To Change The Network Password - Hercules ePLUG 200 Manual

Hercules ePlug 200
If the connection of your adapter to the network has failed, there are several possible causes.
Cause 1: You may not have carried out the connection procedure properly:
- Press for 3 seconds on the Connect button (also referred to as the security button by some
manufacturers) on the adapter which is already part of your existing network.
- Make the connection by pressing for 3 seconds on the Connect button on your Hercules
ePlug 200 adapter. You have 2 minutes to carry this out.
Cause 2: Your adapter may not be properly plugged into an electrical outlet, or this outlet is not
powered:
- Verify that the adapter's power LED
Cause 3: There may be a strong disturbance in your electrical network caused by other devices
near to your adapter:
- Avoid plugging your adapter directly into a power strip.
- Unplug the devices plugged in near to the adapter.
- Try plugging the adapter into another outlet.

2.5. How to change the network password

When you install a HomePlug network, a random password is automatically generated. You can easily
generate a new random password by using the Connect button's restart function.
If you change the network password on an adapter, that adapter will no longer be part of the network.
12/42 – User Manual
is lit up.
- Press for 10 seconds on the Connect button on the
adapter whose password you want to change.
Wait until the adapter restarts.
- Connect the other adapters by pressing for 3
seconds on the Connect button on the adapter
which is already part of the network you wish to
create, and then pressing the Connect button on the
adapter you wish to integrate into that network.
- Repeat this procedure for all adapters you wish to
integrate into the network.