You Haven't Yet Created A Homeplug Network: Initial Installation Of Hercules Eplug 200 Mini/Multi - Hercules ePlug 200 Multi Manual

Hercules ePlug 200 Mini
2.3. You haven't yet created a HomePlug network: initial
installation of Hercules ePlug 200 Mini/Multi
The HomePlug AV standard of Hercules ePlug 200 adapters is not compatible with the
Homeplug 1.0 standard of Hercules ePlug 85 adapters and HomePlug 14 Mbits/s
adapters, but these two standards can coexist side-by-side. In effect, if you have already
installed a HomePlug network in the HomePlug 1.0 standard (for example, with Hercules
ePlug 85 adapters), you cannot add Hercules ePlug 200 adapters to that network. However,
you are perfectly able to install a second network in your home composed of Hercules
ePlug 200 adapters and HomePlug AV compatible devices.
To install a HomePlug network:
3. Restart at step 2 to add adapter C.
1. Connect the Ethernet cable to adapter A. Plug
the adapter into an electrical outlet and, if you wish,
plug another device into the adapter. Then connect
the other end of the Ethernet cable to your network
device.
2. Connect the Ethernet cable to adapter B. Plug
the adapter into an electrical outlet and connect the
other end of the Ethernet cable to your computer or
other network device.
In order to optimize data transfer on the PLC
network, it is preferable not to plug your adapter
directly into a powerstrip.
Hercules ePlug 200 Multi
User Manual – 11/72