Recommendations; Specifications - Hercules ePlug 200 Multi Manual

Hercules ePlug 200 Mini

1.1. Recommendations

- Only connect the Hercules ePlug 200 Mini/Multi adapter to an electrical network which conforms to the
security standards and specifications detailed on the device's electrical rating plate. If you are not sure
about your electrical network, contact an electrician or your power supplier.
- Never open up the Hercules ePlug 200 Mini/Multi adapter, as doing so risks damaging its internal
components.
- Do not attempt to insert any objects into the vents and openings of the Hercules ePlug 200 Mini/Multi
adapter.
- Do not obstruct the vents and openings of the Hercules ePlug 200 Mini/Multi adapter.
- If you need to carry out any maintenance on your Hercules ePlug 200 Mini/Multi adapter, be sure to first
unplug the adapter and entrust the job to a qualified professional in order to avoid the risk of electrocution.
- In order to avoid the risk of fire or electrical discharge, keep your adapter away from:
- rain or humidity, as well as all fluids (water, chemical products and any other liquids),
- sources of heat such as heaters, stoves and any other heat-producing devices (including amplifiers),
- direct sunlight.
- Only plug in the Hercules ePlug 200 Mini/Multi adapter in a sufficiently ventilated room.
- Only connect the Hercules ePlug 200 Mini/Multi adapter using the included Ethernet cable.
- Unplug the Hercules ePlug 200 adapter from its electrical outlet if you do not plan on using it again for an
extended period of time.
- Unplug the Hercules ePlug 200 Mini/Multi adapter from its electrical outlet before cleaning. Use a soft cloth
for cleaning and avoid using aerosol cleaners, water, solvent-based chemical products, benzene, alcohol or
other cleaning products.
- Always keep children away from electrical outlets.

1.2. Specifications

Gigle GGL301 chipset

Compatible with the IEE 802.3, IEE 802.3u, IEE 802.3x and Auto MDI/X specifications

Compatible with the Homeplug AV standard

 Coexists with HomePlug 1.0 modules
 Encryption via the AES 128-bit security protocol
200 Mbits/s transfer rate

Asynchronous transmission mode

Modulation: OFDM, 1024/256/64 QAM, QPSK, BPSK

200m range over the electrical network

Ethernet RJ45 port

Average power consumption:

ePlug 200 Mini V2: 4.3W when in use, 0.4W in standby mode (these values may vary depending

on your home's electrical system)
 ePlug 200 Multi: 4.2W when in use, 1.8W when no data is circulating, 0.45W in standby mode,
enabled via the adapter's button (these values may vary depending on your home's electrical
system)
Internal power supply: 100~ 240V AC, 50/60Hz

Connect button, allowing you to add a Hercules ePlug 200 adapter to an existing network and restore

factory default settings
ON/OFF button

 LEDs on front face
4/72 – User Manual
Hercules ePlug 200 Multi