Scanning The Network; Changing An Adapter's Location - Hercules ePlug 200 Multi Manual

Hercules ePlug 200 Mini

3.5. Scanning the network

An automatic scan of the network is carried out each time you launch Hercules ePlug Station, or when you
access the General tab. You can carry out a manual scan from the General tab by clicking the Scan the
network button.
To disable automatic scanning of the network, go to the Info tab and deselect the
Automatically scan the network box.
From then on, only a manual scan will allow you to refresh the general configuration of your
PLC network.

3.6. Changing an adapter's location

If you have unplugged an adapter to plug it in in another room in your home, you can change the location
information in ePlug Station to update the general configuration of your network.
- In the General tab, click the
- Verify that the MAC address is correct, then select the new room from the drop-down list.
- Click .
icon in the upper right corner of the depiction of the room.
Hercules ePlug 200 Multi
User Manual – 27/72