Basic Operation - Denver DFT-1912DVBT Owner's Instructions Manual

Basic Operation

Turning On/Off
Turning On
First, connect correctly the power adapter and power cord.
Press STANDBY on the TV or POWER button on the remote control
Turing Off
Press on the TV or POWER button on the remote control
The TV enters standby mode and the image on the screen disappears.
NOTE: The TV will still consume some power as long as the power cord is still inserted into the power outlet.
If you are not going to use this TV for a long period of time , be sure to remove the power cord from the power
outlet.
AUTO Searcher Programming
Before you begin watching television, you must first change the input source to DTV or ATV and allow the
television to perform auto tuning.
1. Press the SOURCE button on the remote control.
2. Press the PROG+/PROG- and OK to select the DTV or ATV.
3. Press the MENU button on the remote control.
4. Press the VOL+/VOL- to select the TV Setting menu.
5. Press the PROG- to select [auto tuning]item and VOL+ to confirm
and continue.
6. Press the PROG+/- to select correctly the country.
7. Press the VOL- select [start] item will be highlighted and Press
OK button.
8. Please waiting some minutes ,when the TV is searching channels.
9. Press the OK(ENTER) button to save the programs,when the auto
tuning is completed.
Analog And Digital Channels
This television is capable of receiving the full rang of analog and digital channels available today.
Selecting Channels
You can select analog and digital channels in several ways.
Method 1 Using PROG+/PROG- on the remote Control or P+/P-
Press the PROG+/PROG- or P+/P- to cycle among all Available channels.Only those
channels marked with Tick symbol can be selected by the PROG+/PROG- or CH+/CH- button.
Method 2 Using Q_View on the remote control
Press Q_View to switch to the previously tuned channel.
Press Q_View again to switch to back to the currently tuned channel.
Method 3 Using 0-9 and ENTER on the remote control
¡¤For analog TV channel
Press the 0-9 number buttons to input a channel number and confirm with ENTER to select
up to 100 channel for analog channel
¡¤For digital TV channel
Press the 0-9 number buttons to input a channel number and confirm with ENTER to select .
Method 4 Using master channel list
Press the LIST button on the remote control to display the master channel with the
PROG+/PROG- and ENTER buttons.
Methon 5 Using favorite channel list
Press the FAV button to display a desired favorite channel list ,you may select channel with the
PROG+/PROG- and ENTER buttons.
16
POWER
TV SETTING
Auto Tuning
DTV Manual Tuning
Please select country first,
ATV Manual Tuning
Then select Start to update info.
Programme Edit
Country selection
Start
EXIT EXIT MENU RETURN OK
Q. Q.
VIEW VIEW
LIST
UK
Cancel
ENTER
PROG+
PROG-
FAV