Operation-Remote Control - Denver DFT-1912DVBT Owner's Instructions Manual

Operation-Remote Control

Insert Batteries into the Remote Control
Insert two size AAA batteries by matching the and
compartment.
Precaution on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.
Place batteries with their terminals corresponding to the (+) and (-) indications.
Different types of batteries have different characteristics .Do not mix batteries of different types.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries
and/or cause old batteries to leak chemicals.
Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a
rash .If chemical leakage is found, wipe with the product may have a shorter life expectancy due to storage
conditions.
If the remote control is not used for an extended period of time, remove the batteries from the remote
control.
Using the Remote Control
Use the remote control by control by pointing it towards the remote sensor window of the set. Objects
between the remote control and sensor window may prevent proper operation.
Cautions regarding use of remote control:
Do not expose the remote control to shock. In addition, do not expose the remote control to liquids , and
do not place in an area with high humidity.
Do not install or place the remote control under direct sunlight. The heat may cause deformation of the
unit.
The remote control may not work properly if the remote sensor window of the main unit is under direct
sunlight or strong lighting. In such a case, change the angle of the lighting or TV set, or operate the remote
control closer to the remote sensor window.
Note:This above illustation is for reference only. The remote sensor may be in differentlocations on
different models.
on the batteries to the diagram inside the battery
¼ò ½é ¼ò ½é
13