Table of Contents
Advertisement
Advanced Functions
Input the new password of the Lock system by the number key (0-9) on the remote control and confirm.
Once you set your new password, please remember the password.
3.Block Program Press OK button to Enter the Block Program menu, press the PROG+ or PROG- button to
select a channel, then press the GREEN button to Lock or Unlock the selected channel.
4.Parental Guidance Select a censorship level to censor and block the programs. (Off, 4---18).
Note : This system will only work if the correct information is transmitted by the TV channel.
You must input the password when you operating the items{E.G. [Auto Tuning],[DTV manual Tuning],
[ATV Manual Tuning] and [Programme Edit]},if you enable the LockTV System.
Setting Channels
Accessing the TV SETTING Menu
MENU
1 Press MENU.......
2 Highlight the TV SETTING icon.
Using VOL+ or VOL- button
3 Press PROG- .......
PROG-
To highlight an option and to change settings, press PROG+/- VOL+/-. Press MENU return to previous
menu press EXIT to exit.
Auto Tuning
You may need to run Automatically scan if this is the first time using TV.
1.Select Auto Tuning press "VOL+" or "Enter key", a dialog box will pop up.
2.Select country according where are you, using "VOL-"or "VOL+", press "PROG-",select "Start", and
press "Enter" to start auto scan.
3.Tuning completed (include man-made terminal), a message box showed as bellow. It show the tuning
result. All programs will present on channel list menu. To access channel list menu, press "list" key.
DTV Manual Tuning
Press ENTER or VOL+ buttons to enter DTV manual tuning menu. If current source DTV Manual
Tuning is ATV, it will automatically switch to DTV source.
1.Use VOL+/- to select a channel number.
2.Press ENTER to start searching program.
Note: One channel may contain several digital programs or radio programs.
ATV Manual Tuning
Press ENTER or VOL+ buttons to enter ATV manual tuning menu. If current source is DTV, it will
automatically switch to ATV source.
1.Storage To The channel number which your want to save.
2.Colour System select colour system.
3.Sound System select sound system.
4.current CH current channel number.
5.Search start manual search , "VOL-" downwards search, "VOL+" upwards search. Press "MENU" can
pause searching.
6.Fine Tune Increase or decrease current frequency step by step, till TV signal is the best.
7.SAVE Press red button on the remote control to save the result.
VOL-
VOL+
TV SETTING
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
EXIT EXIT
MENU RETURN
OK
ENTER
21
Advertisement
Table of Contents
