Table of Contents
Advertisement
Advanced Functions
Depending on the signal tuned, you may see different MENU options on your screen. For example ,
Menus displayed below are based on ATV mode.
Picture Control
Accessing the Picture Menu
MENU
1.Press MENU .......
2.Highlight the PICTURE icon use VOL+/- button.
3.Press PROG- .......
PROG-
To highlight an option and to change settings, press VOL+/- PROG+/- .
Press MENU return to previous menu press EXIT to exit.
Adjusting Picture Settings
1.Picture Mode
Select to choose a picture mode to best match the TV environment, which can vary due to room
brightness, type of program watched or the type of image input formexternal equipment.
Standard Select for a normal picture.
Dynamic Select for enhanced picture contrast and sharpness.
Soft Select for a highly defined image in a normally bright room.
User Select to customize the picture as desired.
Note: To quickly change the Picture mode, press the P.P button repeatedly.
2.Contrast Select to adjust picture contrast.
3.Brightness Select to adjust picture brightness.
4.Tint Select to adjust natural flesh tones.Used for 480i format only.
5.Colour Select to adjust picture colour.
6.Sharpness Select to adjust clarity of outline detail.
7.Colour Temp Select to adjust picture colour temperature mode Normal/Warm/Cool mode.
8.PC Setup
Using the PROG+/- buttons to select the item[H-offset][V-offset][Size][Phase]
[Auto adjust] .press VOL+/- button to adjust them.
H-offset Center the image by moving it left or right.
V-offset Centre the image by moving it up or down.
Size Adjust the screen size.
Phase Adjust when characters have low contrast or when the image flickers.
Auto Adjust Press the OK button to set it automatically.
18
VOL-
VOL+
EXIT EXIT
PICTURE
Picture Mode
Stan dard
Contrast
50
Brightness
50
Tint
0
Colour
50
Sharpness
50
Colour Temp.
Normal
PC Setup
MENU RETURN
OK
ENTER
Advertisement
Table of Contents
