Accessing The Modulation Circuit Board - Riello MINI 17 LN NG Installation And User Manual

ENGLISH
- remove the two screws B
- push the casing C forwards
- move the casing C upwards, freeing it from the top hooks
Models 11-13
B
Models 11-13
To access the instrument panel remove the fixing screw D and turn it
Models 17
To open the instrument panel:
- remove the screws C
- slide the instrument panel out and rotate it to the stop position
At the end of the operations described above, put everything back in the
reverse order.
40
Models 17
C
D
D
b
The gasket F should always be in its original seat.
C

6 3 Accessing the modulation circuit board

b
First disconnect the appliance from the electrical power supply us-
ing the mains omnipolar switch.
Models 11-13
- To access the electronics of the control box, remove the casing and
B
turn the instrument panel
- Remove the cover to access the board.
Fig. 44
Fig. 45
Models 17
- To access the electronics of the control box, remove the casing and
take out the instrument panel
- remove the two screws G
- remove the cover and access the board.
Fig. 46
F
G
Fig. 47
Fig. 48
Fig. 49