Models For Outdoor Installation - Riello MINI 17 LN NG Installation And User Manual

Models 11-13
E
Models 17
The figure shows a top view of the boiler with the reference measure-
ments for the flue gas exhaust and combustion air inlet centre-to-centre
distances with respect to the boiler support plate.
Models 11-13
F
Models 17
Fig. 15

3.4.2 Models for outdoor installation

For information on evacuating the products of combustion, please refer
to UNI 7129.
The appliance is type A2 and therefore has no pipes for discharging flue
gases or a suction line for combustion air.
The combustion gases are expelled directly into the air by the integrated
outlet.
Fig. 16
a
Avoid inhaling combustion gases.
a
Avoid direct contact with the combustion gases since they can
reach extremely high temperatures that can cause burns.
a
Avoid direct contact with the discharge since it can reach extremely
high temperatures that can cause burns.
a
To ensure the combustion gases are expelled correctly, it is forbid-
den to obstruct or cover (even just partially) the discharge outlet.
a
It is forbidden to loiter near the appliance when it is operating.
72 135 72 61
200 98
ENGLISH
Fig. 17
102
Fig. 18
Fig. 19
31