Related Manuals for The Handy OX 1800
Summary of Contents for The Handy OX 1800
- Page 1 OX 1800 AIR LIFT OX PART #: 14605G 14605O 14605B 14605R 14605K WARNING: READ INSTRUCTIONS BEFORE OPERATING...
-
Page 2: Safety Warnings
SAFETY WARNINGS 1. Center load on table 1800lb maximum. 9. The working area should be sufficiently lit. 2. Connect to max 120psi shop air compressor. 10. Foot controller should be at least 3 feet away from air lift during raising and 3. -
Page 3: Unpacking And Setup
NOTE: READ ENTIRE MANUAL TO COMPLY WITH ALL SAFETY AND SERVICE PRECAUTIONS. DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY OCCUR UNLESS INSTRUCTIONS ARE FOLLOWED CAREFULLY. UNPACKING AND SET-UP 1. Remove carton top. 2. Remove lag bolts from feet holding the lift to the pallet. 3. -
Page 4: Parts Drawing - Parts List
PARTS DRAWING - PARTS LIST ITEM PART # DESCRIPTION ITEM PART # DESCRIPTION 14476 CYCLE VICE, CV-17 50700 PAWL PLATE WELDMENT 14610 CYLINDER PIN - UPPER 50705 PAWL PLATE CROSS BAR ASSY - PIN 14633 CYLINDER PIN - UPPER 14603 OUTSIDE FRAME WELDMENT 14636 BAG MOUNT SPACER... - Page 5 PARTS DRAWING - PARTS LIST ITEM PART # DESCRIPTION 20590 BEARING ROLLER TRACK, 5305-2RS 22847 4” PHENOLIC WHEEL 50417 3/8-16 x .75 FHCS, MCM 92210A622 50418 1.5” ID X 1” WIDE NEEDLE ROLLER BEARING, MR24N 50419 1.5” OD X 1.25” ID X 1” WIDE BEARING LINER, M120N GFD1641 1/4”-28 SAE-LT STRAIGHT .55”...
-
Page 6: Routine Maintenance
ROUTINE MAINTENANCE 1. Daily visual checks: Table Specs A. Check all retaining rings and working parts are in place and in Max Height: 46” good working condition before operations. Min. Height: 9” B. Check air bellows, air hose, and foot pedal daily for leaks. Table Top Dimensions 2. -
Page 7: Lifetime Limited Warranty
Handy lifts: Standard 1000, S.A.M. l 000, S.A.M. 2 l 000, B.O.B. 1500, Electric/Hydraulic 1500, Gruntavore 1800, Dual Lift, B.U.L., Standard 1200 Air Lift, S.A.M. 1200 Air Lift and OX 1800. Attachments for these lift models are not included in the limited lifetime warranty. This warranty only covers the structure of the lift itself. - Page 8 This product has been assembled according to manufacturing print and includes all required component parts. Product has been tested and passed all inspections free of any leaks or malfunction. INSPECTED BY: Handy, Division of Janco Industries Inc. 600 W 2nd Ave, Sully, IA 50251 Ph: 855-752-5446 Fax: 641-594-3330 www.handyindustries.com...
Need help?
Do you have a question about the OX 1800 and is the answer not in the manual?
Questions and answers