Advertisement
S.A.M.2 1000 AIR LIFT
INSTRUCTIONS
ITEM # 16900G - 16900O - 16900R - 16900B
1. Center load on table - 1000 lb. maximum.
2. Connect to 110 psi maximum shop air.
3. Keep safety bar in position at all times - except
when lowering.
4. Keep hands and tools from under carriage.
5. Do not mount table when in elevated position.
6. Do not ride vehicle onto lift.
7. Lift must be in the lowered position when moving.
8. Only trained persons should operate Air Lift.
9. The working area should be sufficiently lit.
10. Foot controller should be at least 3 feet away from
Air Lift during raising and lowering operation.
11. Recommended for indoor use only.
12. Tie-down straps must be used in conjunction with
the holes provided in the lift top.
PARTS DRAWING
PART LIST
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for The Handy S.A.M.2
Summary of Contents for The Handy S.A.M.2
- Page 1 S.A.M.2 1000 AIR LIFT INSTRUCTIONS PARTS DRAWING PART LIST ITEM # 16900G - 16900O - 16900R - 16900B 1. Center load on table - 1000 lb. maximum. 2. Connect to 110 psi maximum shop air. 3. Keep safety bar in position at all times - except when lowering.
- Page 2 NOTE: READ ENTIRE MANUAL TO COMPLY WITH ALL SAFETY AND SERVICE PRECAUTIONS. DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY OCCUR UNLESS INSTRUCTIONS ARE FOLLOWED CAREFULLY. UNPACKING AND SET-UP 1. Open carton, then remove ramp, drop panel and shipping boards. 2. CAREFULLY TURN TABLE UPRIGHT INTO OPERATING POSITION BEFORE REMOVING SHIPPING CABLE RESTRAINT FROM SCISSOR MECHANISM.
- Page 3 PARTS DRAWING - PARTS LIST Shop for other garage accessories on our website.
Need help?
Do you have a question about the S.A.M.2 and is the answer not in the manual?
Questions and answers