The Handy 16013G Instructions

Table of Contents

Download this manual



1. Center load on table - 1500 lb. maximum.

2. Connect to 110 psi maximum shop air.

3. Keep safety bar in position at all times - except

when lowering.

4. Keep hands and tools from under carriage.

5. Do not mount table when in elevated position.

6. Do not ride vehicle onto lift.

7. Lift must be in the lowered position when moving.

8. Only trained persons should operate Air Lift.

9. The working area should be sufficiently lit.

10. Foot controller should be at least 3 feet away from

Air Lift during raising and lowering operation.

11. Recommended for indoor use only.

12. Tie-down straps must be used in conjunction with

the holes provided in the lift top.

Handy Division of Janco Industries Inc . Ph: 855-752-5446

B.O.B. 1500 AIR LIFT

Instructions



Part drawings

ITEM # 16013G – 16013O – 16013R - 16013B



Part list

Fax 641-594-3330 www.handyindustries.com

Table of Contents

Need help?

Do you have a question about the 16013G and is the answer not in the manual?

Page 1 Part drawings  Part list ITEM # 16013G – 16013O – 16013R - 16013B 1. Center load on table - 1500 lb. maximum. 2. Connect to 110 psi maximum shop air. 3. Keep safety bar in position at all times - except when lowering.
Page 2 NOTE: READ ENTIRE MANUAL TO COMPLY WITH ALL SAFETY AND SERVICE PRECAUTIONS. DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY OCCUR UNLESS INSTRUCTIONS ARE FOLLOWED CAREFULLY. UNPACKING AND SET-UP 1. Open carton, then remove ramp and shipping boards. 2. Connect foot-operated air valve to 110 psi maximum air supply. The lift may be damaged and/or personal injury may result if the pressure exceeds the maximum 110 psi rating.
Page 3 PARTS DRAWING - PARTS LIST...
Page 4 Also excluded in this warranty are items that were purchased for the Handy lift and installed on it at the factory such as electric motors, hand-held pendants and bearings.

16013o16013r16013b