Cleaning And Maintenance; Protecting The Environment; Technical Specifications - Omnitronic MTC Series User Manual

6 Cleaning and Maintenance

DANGER TO LIFE! Disconnect from mains before starting maintenance operation! Please use a soft lint-free
and moistened cloth. Never use alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts. If the power supply cable of this device
becomes damaged, it has to be replaced by a special power supply cable available at your dealer. Should
you have further questions, please contact your dealer.

7 Protecting the Environment

Disposal of old equipment
When to be definitively put out of operation, take the product to a local recycling plant for a
disposal which is not harmful to the environment. Devices marked with this symbol must not be
disposed of as household waste. Contact your retailer or local authorities for more information.
Remove any inserted batteries and dispose of them separately from the product.
You as the end user are required by law (Battery Ordinance) to return all used
batteries/rechargeable batteries. Disposing of them in the household waste is prohibited. You
may return your used batteries free of charge to collection points in your municipality and
anywhere where batteries/ rechargeable batteries are sold. By disposing of used devices and
batteries correctly, you contribute to the protection of the environment.

8 Technical Specifications

Power supply:
Power consumption:
Power output:
Stereo 4 Ω
Stereo 8 Ω
8 Ω bridged
100 V
100 V bridged
Voltage gain:
Frequency range:
THD:
S/N ratio:
Damping factor:
Input impedance:
Input connectors:
Output connectors:
Circuitry:
Control elements:
LED indicators:
Protection circuits:
Cooling fan:
Construction:
Dimensions (DxWxH):
Weight:
Specifications are subject to change without notice due to product improvements.
MTC-4806
100-240 V AC, 50/60 Hz
900 W (1/8 Power)
6 x 800 W
6 x 400 W
3 x 1500 W
6 x 200 W
3 x 1500 W
28.2 dB / 34.2 dB (bridge mode)
>350 per channel
20 kΩ (balanced), 10 kΩ (unbalanced)
XLR (with link)
Speaker, plug-in screw terminals
Power switch, level control per channel, mode switch
Signal, clip, protect, power, bridge
Short-circuit, DC voltage, overheat, overload, under voltage
2 x front to rear
408 x 483 x 88 mm (19", 2 U)
8.7 kg
15 • EN
MTC-6408
900 W (1/8 Power)
8 x 800 W
8 x 400 W
4 x 1500 W
8 x 200 W
4 x 1500 W
20-20000 Hz
<0.05 %
>119 dB
Class D
Steel chassis
9.3 kg