Cleaning And Maintenance; Protecting The Environment; Technical Specifications - Omnitronic PKD-352 User Manual

6 Cleaning and Maintenance

DANGER TO LIFE! Disconnect from mains before starting maintenance operation! Please use a soft lint-free
and moistened cloth. Never use alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts. If the power supply cable of this device
becomes damaged, it has to be replaced by a special power supply cable available at your dealer. Should
you have further questions, please contact your dealer.

7 Protecting the Environment

Disposal of old equipment
When to be definitively put out of operation, take the product to a local recycling plant for a
disposal which is not harmful to the environment. Devices marked with this symbol must not be
disposed of as household waste. Contact your retailer or local authorities for more information.
Remove any inserted batteries and dispose of them separately from the product.

8 Technical Specifications

Power supply:
Power consumption:
Power output sine:
Stereo 4 Ω
Stereo 8 Ω
8 Ω bridged
Frequency range:
Damping factor:
Distortion factor:
Slew rate:
S/N ratio:
Input impedance:
Gain:
Input connectors:
Output connectors:
Circuitry:
Control elements:
LED indicators:
Protection circuits:
Construction:
Dimensions (DxWxH):
Weight:
Specifications are subject to change without notice due to product improvements.
PKD-352
230 V AC, 50 Hz
70 W (1/8 power)
2 x 175 W
2 x 100 W
1 x 350 W
20-20000 Hz, ± 0.5 dB
>300
0.05 %
20 V/µsec
105 dB
20 kΩ (balanced), 10 kΩ (unbalanced)
38 dB
XLR and RCA L/R
screw connectors and speaker mounting sockets
class D
power switch, level controls, mode switch, sensitivity control
power, signal, clip
softstart, short-circuit, overheat, limiter, overload, VHF signals, DC
voltage
(19") 48.3 cm rack installation 1 U
190 x 483 x 44 mm
2.5 kg
15 • EN