Using Your Vacuum Cleaner - Kalorik WFVC 46130 Manual

Step 6: Insert the hose insert into the barrel (for vacuuming function) or
in the "blower" hole (1) located in the main body (for blower function).
Gently rotate to the right to lock the hose in place and make sure it fits
tightly (Fig. 6).
Step 7: Insert the adjustable tube into the hook and set the tube in
place (Fig. 7). Fasten with the screw.
Step 8: Insert curved tube of the hose into the adjustable tube (Fig. 8).
Make sure the connection is tight.
Step 9: Insert the end of the extension tube into the floor brush (Fig. 9).
Make sure the brush is tightly attached to the tube.

USING YOUR VACUUM CLEANER

• Assemble the vacuum cleaner before use.
• ADD WATER TO THE BARREL BEFORE USE. Vacuuming without water
can damage the motor.
• DO NOT operate the vacuum when water level is below the
"Working Level" line on the water tank.
• Unwind the power cord and attach the cord to the hook located on
the base (17). This allows more stability when the unit is rolled from
one location to another.
• Plug into a wall outlet.
www.KALORIK.com
7
WFVC 46130 - 200616