Using Your Vacuum Cleaner - Kalorik WFVC 44452 Manual

4. After the handheld unit is securely inserted into the main
body(Fig.4), connect the adaptor into the power outlet. (Fig.5)
5. Connect the power plug into the charging port. (Fig.6) Make sure
that the connecting charging terminals of the vacuum cleaner and
charger are not dirty or obscured. Unplug the adaptor and clean
the terminals if necessary.
6. Insert the charger plug into the electrical outlet.
o The charging indicator will light up in red to indicate the
battery is charging. (Fig.7)
o The charging indicator color will turn blue when the battery is
fully charged.
• It is normal for both the adaptor and vacuum cleaner to become
warm during charging.
• You can charge the vacuum cleaner at any time when it is not in
use. Please remove the charger once it is fully charged.
• When using your handheld unit continuously with the built-in battery
pack, the batteries in your handheld unit will become warm which
is normal.
Note: We recommend charging after every use to maintain the
maximum performance.

USING YOUR VACUUM CLEANER

1. Press the chamber release button as shown above to unlock the
chamber. (Fig.8)
2. Pull out the reservoir handle and remove the reservoir.
Note: Do not press the 'Power' button on the stick handle if the
chamber is removed from the vacuum.
3. Unlock the top lid of the reservoir.
4. Pour the sufficient volume of fresh/ tap water into the reservoir, up
to the 'Max' level as marked in the chamber.
5. Close and lock the top lid. Return the reservoir back into the
chamber and lock it.
6. Turn the unit on by pressing the "Power" button on the stick handle.
Select either the "Power" or "ECO" mode by pressing the speed
www.KALORIK.com
14
WFVC 44452 - 180330