2. Plug the charging dock into a wall outlet. Allow the handheld vacuum
to charge until all three indicator lights are lit up.
USING YOUR VACUUM CLEANER
If using an attachment, install per the instructions in the ACCESSORIES
1.
section.
Press the power button. Press the speed button below the power
2.
button if you wish to change the speed.
Power button
Speed button
LED indicators
Note: The LED indicators show how much battery power is left in the
handheld vacuum. When the battery power is low, only one indictor will
be on and will begin to blink.
Run the nozzle over the surface to be cleaned.
3.
When done vacuuming, press the power button again to turn off.
4.
To empty the dust container, place the vacuum over a trash can
5.
and press the release button as shown below.
Release button
www.KALORIK.com
6
HVC 46818 - 200605