Contents 3.2. Delete Video Preface 4. Introduction to “Color Palette” Sub-menu Safety Instruction 4.1. Color Palette Description Preliminary Acquaintance with Infrared Thermal Imager 4.2. Application of Color Palette Overview 5. Introduction to “Emissivity” Sub-menu Cleaning of the Products 5.1. Emissivity Description Lens Maintenance 5.2.
Preface Warning Respected users: The warning describes the acts that may cause harm to users. Please How are you! Thank you for purchasing our instrument. In order to use it in observe the following operation in order to avoid electric shock or personal a better manner, we remind you to read the instruction for use carefully injury.
Page 4
Please ensure that the plug of the adapter is inserted into the specified Please use the original adapter of the company to charge the product. power socket. The use of non-original power supply accessories may cause equipment overheating, electric shot, fire, and leakage of chemicals inside the battery, The adapter plug may be different due to the regions.
Long-time storage and regular charging. Security department night monitoring. The product should be placed at a cool and dry environment if it not used Overview for a long time. If the product installed with battery is stored for a long time, charging should be made regularly.
Cleaning of the Products Charging of the Battery and Description The shell of this product is cleaned with a damp cloth or diluted soapy Use USB data line to charge: water. Do not use abrasives, isopropyl alcohol or solvents to clean the lens The product has built-in chargeable 26650 lithium batteries.
Product Description 1. Instruction to Structure Type-C USB (Open the protective cover) Visible light camera 3.5 inch full view TFT Infrared thermal display screen image sensor Key area Image capture key Handheld area Image capture key...
Time Navigation key: Up, down, left and right WIFI: Search the WiFi of this product through mobile devices and access it through IP. Temperature range: The range of temperature measurement (For HT-A10 Initial Operation products). Product boot/shutdown Color code: Used to mark the color corresponding to the relative temperature Press and hold the “...
Page 10
HT-A10 products). The function to hide highest/lowest temperature column at the screen bottom Under the operation after normal start up, press “...
Introduction to the Menu 2. Introduction to “image” Sub-menu Press the left of “MENU/ ” key and the menu bar appears. They are “image 2.1. View Image overlapping”, “image”, “video”,“color palette”, “emissivity” and “setting” Press the “ /MENU” button to enter the main menu, and select “ ”...
3. Introduction to “Video” Submenu 4. Introduction to “Color Palette” Sub-menu 3.1.View Video 4.1. Color Palette Description Press “ /MENU” key to enter the main menu, select “ ” in the main The palette can be used to change the pseudo-color display of the menu(video), as shown below.
4.2. Application of Color Palette for you to carry out the most correct temperature measurement. The surface emissivity will produce giant impact on surface temperature measured by the Color palette product. Understanding the surface emissivity will enable you to obtain Spectra correct temperature measurement result.
5.3. The Emissivity Value of Common Materials Press “ ” and “ ” keys in navigation key to select the emissivity. Then press “ SELECT/ENTER” key to determine selection of the emissivity. Substance Thermal radiation Substance Thermal radiation Press “ ”...
” key in the Spot Spot navigation keys to enter the temperature range setting. Can be set to low temperature (-20°C to 120°C) or high temperature (120°C to 550°C). WiFi WiFi SN:Thermal-0000 The temperature range is used for HT-A10 products.
6.6. Time Format Setting After the time setting is completed, press “ ” key to return. Press “ /MENU” exit from the menu. After you select " "(time format), press the “ ” key in the navigation key to enter the time format setting. Can be set to 24 hours or 12 6.8.
6.9. Wireless WIFI on and off Click to take a photo on the mobile device, and the image will be saved on the machine synchronously, as shown in the figure below. As shown in the figure, after selecting “ ” (WiFi), press the “ ”...
Page 18
Picture information: display file name, emissivity, capture time, maximum 2. After installation, open Enter the picture analysis software interface, temperature, minimum temperature, center point temperature, original click "Open File", and select the picture to be analyzed,as shown in the thermal image. figure: 3.
Need help?
Do you have a question about the HT-A10 and is the answer not in the manual?
Questions and answers