Subscribe to Our Youtube Channel
Related Manuals for HTI HT-18
Summary of Contents for HTI HT-18
- Page 1 Thermal Imaging Camera Instruction Manual MENU SELECT ENTER User Manual Version 1.0. Revised 6/11/2019.
-
Page 2: Table Of Contents
Contents Safety instruction 3.2 Application of color palette Preliminary acquaintance with infrared thermal imager 4. Introduction to “emissivity” sub-menu Overview 4.1 Emissivity description Cleaning of the products 4.2 Emissivity setting Lens maintenance 4.3 The emissivity value of common materials Charging of the battery and description 5. -
Page 3: Safety Instruction
Safety instruction Warning Please ensure that you have read and understood the safety precautions The warning describes the acts that may cause harm to users. Please described in the following text before using the product so that you can observe the following operation in order to avoid electric shock or personal operate it correctly. - Page 4 Don’t weld the battery without permission. Do not touch the electric wire with wet hands. Such operation may damage the battery and result in leakage and It is possible to cause electric shock when touching the electric wire with explosion of the battery. wet hands.
-
Page 5: Preliminary Acquaintance With Infrared Thermal Imager
Preliminary acquaintance with infrared The product temperature may increase after a long time of thermal imager charging. You may feel scorching heat when the hands touch the sensors. For a long time, infrared thermal imaging detection technology has become an important means to ensure Industrial safety in developed countries. The Problem caused by water condensation application field includes electric power, metallurgy, petro-chemistry, Don’t bring the instrument into low temperature environment from high... -
Page 6: Overview
Overview Cleaning of the products This product is an infrared camera that integrates surface temperature Please use damp cloth or weak soap to clean the enclosure of the device. measurement and real-time thermal image. The traditional inferred Don’t use abradant, isopropanol or solvent to clean. The lens and screen thermometer needs to measure every component one by one while it is not should be cleaned with use of cleaning agents for professional optical necessary for infrared imaging camera, thus saving time. -
Page 7: Charging Of The Battery And Description
Charging of the battery and description Performance index Use USB data line to charge: The product has built-in chargeable 18650 lithium batteries. 3.2 ″ full angle TFT Display screen display screen When the battery level is low, the top right of the screen will display Infrared image resolution 320×240 “... -
Page 8: Product Description
Product description File format 1. Instruction to structure Micro USB 2.0 Power supply Built-in chargeable 18650 battery Working time 2-3 hours Selectable: 5 minutes/20 minutes/ Automatic power-off time Display screen not power off automatically Setting command Unit, language, date, time, information Language, English、Chinese、Italian、German Product size... - Page 9 Please open the cap in use Micro USB Visible light camera Please open the cap in use Infrared imaging sensor Image capture key battery...
-
Page 10: Display Description
2. Display description 4. The lowest temperature cursor: used to indicate the lowest temperature position in the screen area. It will move with the movement of the lowest temperature. The cursor displays red. The temperature value is displayed at Current emissivity the central position of the screen. -
Page 11: Initial Operation
Initial operation The function to hide highest/lowest temperature column at the screen bottom Product boot/shutdown under the operation after normal start up, press “ ” key and Press and hold the “ ” button for more than 3 seconds to turn the screen bottom will display highest/lowest temperature column. -
Page 12: Introduction To The Menu
Introduction to the menu 2. Introduction to “image” sub-menu Press the left of “ ” key and the menu bar appears. They are “image M E N U overlapping”, “image”, “color palette”, “emissivity” and “setting” submenus. 2.1. View image Press the “ ”... -
Page 13: Delete Images
2.2. Delete images The following is the image of the same object with selection of different color palettes. When viewing the images, the screen will show the prompt of “Delete photo？” by pressing “ ” key. If “yes” is selected at the moment, press “... -
Page 14: Introduction To "Emissivity" Sub-Menu
4.2. Emissivity setting 4. Introduction to “emissivity” sub-menu The product is provided with four types of object measurement modes: 4.1. Emissivity description Coarse object (0.95) Semi-matte object (0.85) The emissivity of the product can be adjusted from 0.01 to 1.00 with the Semi-shiny object (0.60) default value of 0.95. -
Page 15: The Emissivity Value Of Common Materials
If you select "self-defined" emissivity, press the " " button to enter 5. Introduction to “setting” sub-menu SELECT the editing state.Press “ ” / “ ” keys to select the number to be Press “ ” key to select the “ ”(setting) option in the main changed, press “... -
Page 16: Auto Shutdown Setting
5.6. Time setting 5.1. Auto shutdown setting After entering the "Settings" sub-menu, select " " (automatic As shown in the figure, after selecting “ ” (set time), press “ ” shutdown), press navigationThe “ ” button in the button enters the in the navigation key to enter the setting time. -
Page 17: Enable/Disable Of The Highest And Lowest Temperature Cursor
5.7. Enable/disable of the highest and lowest Failure phenomenon Failure cause Solution temperature cursor The battery is not Install the battery The thermal imaging installed As shown in the figure, after selecting “ ” (cold hotspot), press the device cannot start The power of the battery Replace with new “...
Need help?
Do you have a question about the HT-18 and is the answer not in the manual?
Questions and answers
Good Morning. Which is the voltage of the battery for HT18?
The battery for the HTI HT-18 operates at 5V.
This answer is automatically generated