Advantech MIO-3110 Startup Manual

MIO-3110 Mini-PCI to USB
Interface Connection Hub
Startup Manual
Introduction
Advantech introduces its new MIO module, MIO-3110 with
Mini-PCI interface for advanced USB interface connection
hub.
Packing list
Before you begin installing your card, please make sure
that the following materials have been shipped:
• 1 MIO-3110 Mini-PCI USB interface connection hub
• 1 Startup manual
• 1 CD ROM for MIO-3110 Driver
• 1 USB cable
Cable for USB 4 PORTS/10P-
2.0MM*2 30.5CM
If any of these items are missing or damaged,
contact your distributor or sales representative
immediately.
Note 1: Acrobat Reader is required to view any PDF
file. Acrobat Reader can be downloaded at:
www.adobe.com/products/acrobat/
readstep2.html(Acrobat is a trademark of
Adobe.)
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://www.advantech.com/support
This manual is for the MIO-3110 series Rev. A1.
Part No.2006M31100
Specifications
• Mini PCI Type III Interface
• NEC µPD720101 USB 2.0 Host Controller
• Provides Five USB 2.0 Ports up to 480Mbps
• Provides four USB 2.0 Ports
• Supports both USB 2.0 & USB 1.1 devices
Mechanical and Environmental
• Power requirement: +5V DC
• Size: 50.8mm x 59.6mm
• Operating Temperature: 32°F ~ 140°F (0°C ~ 60°C)
• Speed:Supports high-speed (480Mbps), full-speed
p/n: 1700000601
1st Edition
Aug. 2006
(12Mbps), and low-speed1.5Mbps) data rate
MIO-3110 Startup Manual 1