SPYPOINT FLEX - Dual-Sim Cellular Trail Camera Manual

Power Supply

CHOOSING A POWER SOURCE

3 options are available to you:

• Alkaline or lithium AA batteries
• Rechargeable battery 12 V (#KIT-12V sold separately)
• Rechargeable battery pack 7,4 V (#LIT-22 sold separately)

NOTE

We suggest using a SPYPOINT #LIT-22 rechargeable lithium battery pack with your camera. It offers a longer battery life than AA batteries, and saves money over the life of the camera.

FOR BEST RESULTS AND NO LEAKAGE

• Use only new alkaline or lithium batteries.
• Do not mix new and old batteries.
• Do not use rechargeable AA batteries (their lower voltage will generate operational issues).

HOW TO INSTALL AA BATTERIES PROPERLY

• Unlock the latch and open the FLEX door.
• Place the battery holder back into the battery compartment with arrows facing up (See Photo)
• Insert the AA batteries into the battery holder following polarity (+) and (-) indications.
• Place the battery holder back into the battery compartment.

AN EXTERNAL 12 V BATTERY

• The camera was designed to recognize and use an optional power source other than the 8 AA batteries.
• You can purchase a 12 V cable and battery kit (like the #KIT-12V, sold separately). Simply plug the 12 V cable into the 12 V jack of the camera and connect the other cable end to the 12 V battery.

MANAGING VARIOUS CAMERA POWER SUPPLY

If you choose to plug an external 12 V battery (#KIT-12V, sold separately) into your camera, it becomes your camera's new primary power source. The AA batteries will only be used once the 12 V battery is depleted.

You can check the battery level on your device or in the mobile application:

• In the application: on the home page, you will see the battery charge level for each of your devices. You can access more details on the status of your battery by going to the STATUS page. When the battery logo turns red, we suggest that you change the batteries before it is completely drained.
• Once the device is powered on. There are four green lights within the battery icon indicating the battery level.

Memory Card

INSTALLING A MEMORY CARD (NOT INCLUDED)

The use of a memory card is necessary for the operation of the camera. It is used to save photos, videos and other camera status files. Note that photos and videos in their original format are kept on the memory card. The files sent to your application are lighter versions. You can retrieve your photos and videos at any time by removing the card from the camera and transferring the contents to another device (e.g.: computer).

Your camera requires a microSD memory card, with a maximum capacity of 512 GB, sold separately. Here is a table showing the approximate quantity of photos or videos that can be recorded on the card, according to different memory card capacities.

INSERTING YOUR MEMORY CARD

• Ensure the camera is turned OFF.
• Find the microSD card slot. It is located at the bottom of the camera (see photo).
• Insert a microSD card (up to 512 GB) in the microSD card slot with the metal contacts facing up.
• The card is inserted correctly when a click is heard.

NOTE

The FLEX is equipped with continuous mode. This means that when the memory card is full, the camera continues to save your photos and videos by erasing the fi rst recorded files.

REMOVING YOUR MEMORY CARD

• Before removing a memory card, always turn your camera OFF to prevent files on the card from being deleted or damaged.
  
• To remove the card, push it lightly into the camera until you hear a click. Then take it out of the device.

FORMATTING THE MEMORY CARD

During the start up of the camera, you can use the FORMAT button on the device to quick format the microSD card. This is required if you want to be able to take photos and videos while transmitting.

1. Turn ON the camera.
2. Press and hold the FORMAT button for 5 seconds.
   
3. The microSD light will blink green while the card is formatting.
4. Once complete, the microSD light will become solid green.

Preparation

SCREW IN ANTENNA

The antenna doesn't come installed. Please insert as shown in the photo.

ACTIVATING YOUR CAMERA

Before you can use your camera, you must activate it. To do so, you will need the activation code.

FINDING THE ACTIVATION CODE
The activation code is located inside the FLEX's battery compartment.

Activation

To activate your camera, you have two choices: you can either do it via the SPYPOINT app or via our website www.spypoint.com.

SPYPOINT APP

If you choose to use the SPYPOINT app to activate your device, follow these steps:

1. On Google Play TM or the App Store TM, search for "SPYPOINT app".
   
   
2. Download and install the app on your smartphone or tablet.
3. Start the app. Select "ACTIVATE A DEVICE". Then follow the steps to create an account.
4. When prompted to select a Device Model, select "FLEX" and follow the instructions on the screen.
5. Once completed, a confirmation email with instructions on how to finalize the creation of your account will be sent to you.
6. Log in to the SPYPOINT app using your email address and password.

SPYPOINT.COM WEBSITE

If you choose to use the SPYPOINT website to activate your device, follow these steps:

1. On the www.spypoint.com, select "MANAGE YOUR ACCOUNT" in the top navigation menu. On the displayed page, select "CREATE AN ACCOUNT", fill out the required fields, then log in.
2. Select the + sign on the far right of the page; in the list, select "FLEX" then follow the steps.
3. When complete, a confirmation email with instructions on how to finalize the creation of your account will be sent to you.
4. On the SPYPOINT website, log in to your account using your email address and password.

Installation

INSTALLING YOUR CAMERA

1. To install the camera, loop the installation strap through the intended slots.
2. Choose a solid tree that does not move in the wind, as movement will cause false detections.
3. Make sure the area immediately in front of your camera is free of branches or twigs that could be blown away by the wind.
4. The camera should be at the same height of the animal's mid-body.
5. The targeted animal should be at 25 feet (7.5 meters) away from the camera.
   
6. To produce brighter photos and videos at night, there should be items reflecting the camera's flash in the background.

STARTING YOUR CAMERA

IMPORTANT VERIFICATIONS BEFORE STARTING YOUR CAMERA:

• The antenna is installed (antenna support removed).
• The 8 AA batteries or LIT-22 are inserted in the camera's battery compartment.
• The microSD card is formatted and inserted in the camera.
• The camera is activated.
• The camera is securely installed.

1. Turn ON the camera.
   
2. The green STATUS light will fl ash, the battery level will be displayed.
3. The signal lights will fl ash together until signal is found. Once signal is found number of bars will correspond to the signal strength.
4. The microSD light will be ON.
5. The delay light will blink for 10 seconds, and the STATUS light will turn solid green.
6. All lights will turn OFF and the camera will go into standby mode – awaiting a trigger.

OPERATIONAL VALIDATION TEST

You can use the following test to make sure everything works as it should:

TEST BUTTON
The TEST button forces the camera to take a single photo and transmits it. It will NOT work if the camera is already busy with another task. (Synchronizing with the server, recording a photo/video or running through the start up sequence of the camera.) This button will only work if the camera is on an active transmission plan with photos remaining.

1. After the camera has started, and passed through the startup light sequence, the TEST button can be used. Ensure all lights are OFF before proceeding.
   
2. Press the TEST button for at least 1 second.
3. Battery level will be displayed.
4. Signal lights will blink together every second until the camera receives the signal strength. Then it will display the number of lights corresponding to the signal strength.
5. All Lights will turn OFF.

Configuration

MANAGE DEVICE

Use the SPYPOINT app to configure your camera.

IMAGE CAPTURE

CELLULAR

CAMERA COMMANDS

GENERAL

Verification

VERIFYING CAMERA STATUS

Different tools are available to help you check the status of your FLEX and to inform you of any problems that may occur during its operation. In this section, we will see 3 tools:

NOTIFICATIONS

The camera was designed to send notifications to your SPYPOINT app. This is to help you stay informed of the status of your camera.

You will receive a notifi cation on your smartphone at the next transfer when a photo/video is received or important notification is sent:

• You forget to insert a microSD card in your camera.
• The inserted microSD card is not compatible with your camera.
• The battery percentage is too low.

APPLICATION STATUS PAGE

Here are the different indicators of the FLEX status you have access to. They are accessible on your app or on the SPYPOINT website. What appears in this page is a refl ection of the camera at the last communication.

Tool – Accessories – Options

SPYPOINT MOBILE APP

The key to a successful hunt is information and that's what the SPYPOINT app is all about. View and sort all your photos and videos from the field, check hunting conditions, update camera settings, manage stand locations on your property, and more, right from your mobile device. It's the mobile scouting solution you need to go into the woods confidently.

From the app, you can:

• Manage camera statuses, settings and plans
• View and manage photos and videos
• Sort photos with advanced AI species filters
• Request FULL-HD photos and videos
• Maintain custom maps and markers
• Monitor weather conditions

Transferring Files to a Computer

TRANSFERRING FILES

• Turn the camera OFF.
• Remove the microSD card from the camera.
• Insert the microSD card in the microSD computer slot, or use a USB adapter for microSD cards.
• The computer will recognize the microSD card. There may be two different disks recognized, this is normal after use in the FLEX.
• If the computer doesn't detect the microSD card, this means the memory card is corrupt and needs to be replaced.

ON A PC

On your desktop, click on "My Computer" or "This PC".

Locate your device under "Removable Disk" and click to access it. Then, click on "DCIM" and "100DSCIM" to find all saved photos and videos. If you do not see the photos or videos in the folder you checked, try again in the other "Removable Disk" folder.

Select the files you want to copy. With some Windows versions, the simplest way is to select them by clicking on the "Home" tab and choosing "Select all" on the right side. With some Windows versions, you can press on "Ctrl" and "A" or click on the "Edit" menu and choose "Select all".

Click on the "Copy" icon on the left of the ribbon (or hold the "Ctrl" and "C" keys).

Once your photos and videos are transferred, click the "Safely remove hardware and eject media" button located in the task bar, then click "Eject mass media storage device".

If you do not want to select all photos or videos, hold down the "Ctrl" key and click on the files you want to select before clicking on the "Copy" icon.

Access the folder where you want to save your photos and videos or create a new folder by clicking on the "New folder" button. (You can also click on "Ctrl", "Shift", and "N" to create a new folder, or right-click in a blank space in the "Pictures" folder and choose "New", then, in the following menu, click on "Folder".)

Enter a name for your new folder, click on "Enter", then double-click on the folder to open it. In the "Home" tab, choose "Paste" (or click simultaneously on the "Ctrl" and "V" keys). The photos and videos will be copied in the new folder.

ON A MAC

Click on the search tool in the "Toolbar". Click the "Go" Tab, then select "Computer".

Locate your device under the "Locations" tab and click to access it. Then click on "DCIM" and "100DSCIM" to find all saved photos and videos.

Click on "Edit" in the toolbar at the top of the screen, then click on "Select all" to highlight all individual files on the device. You can also access the "Select all" option by simultaneously clicking "Cmd" and "A". If you don't want to import everything, you can highlight the desired photos or videos individually. Transfer photos and videos by clicking on "Cmd" and on the file name. Click on "Edit again" and then "Copy" (or "Cmd" and "C") to copy the highlighted files.

Access the folder where you want to save your photos and videos, or create a new folder by right-clicking and pressing "Cmd" at the same time, then select "New folder" from the menu.

Click on "Modify", then on "Copy" (or "Cmd" and "V") to copy your chosen files in the selected folder. The photos and videos can take a few minutes to download, depending on the size and the number of the file you are importing.

Once your photos and videos are transferred, click on the "Eject" icon beside the name of your device, than unplug the device from your MAC.

Offered Accessories

Troubleshooting

Warranty and Preparation

LIMITED WARRANTY

This SPYPOINT product is covered by a 2-year warranty that also covers parts and workmanship from the purchase date. The electronic cash register receipt is a proof of purchase and must be presented to confi rm that the warranty is applicable. This warranty will be honored in the country of the original purchase only.

THIS SPYPOINT WARRANTY DOESN'T APPLY TO:

• Consumable parts, including but not limited to batteries, the performance of which are known to decrease over time.
• Damages caused by improper use of the device, use of the device with another product, negligence, accidents, contact with liquid, fi res, earthquakes, or any other type of external causes.
• SPYPOINT products bought online from an unauthorized retailer.
• Products that were modifi ed or altered.
• Aesthetic damages, including but not limited to scratches or plastic breakage.
• Damages caused by the usage of a product outside of the SPYPOINT recommendations.

INSTRUCTIONS FOR REPAIR SERVICES

SPYPOINT will repair the product, free of charge, or replace it at its discretion by an equivalent product, if it has a manufacturing defect covered by the warranty described above. Shipping costs to send us a product will have to be assumed by the costumer at all times. SPYPOINT will assume shipping costs only for the return of products under warranty.

Breakage or defect repairs not covered by the warranty will be charged at a reasonable cost. The customer will be responsible for all shipping costs.

In no circumstances will SPYPOINT accept returns without an RMA number (return merchandise authorization). It is essential to contact the SPYPOINT support team before making a return.

1. Before sending a product for repairs, you can get help in many ways. Most problems can be solved over the phone or online:
   • Contact our chat service directly on the SPYPOINT site (in the lower right-hand corner of the Support section, by clicking on the "Start Chat" window, www.spypoint.com).
     • Monday to Friday — 8:30 a.m. to 8:00 p.m.
     • Saturday-Sunday — 8:30 a.m. to 5:30 p.m.
   • Contact us by email at the following address: service@spypoint.com
   • Go to www.spypoint.com/en/support for more information about your devices.
2. If a product has to be returned, you will be assigned an RMA number to authorize the return of the product. Please keep this number with you.
3. The original receipt or a copy of the receipt has to be included in the package prepared for SPYPOINT.
4. The RMA number should be written on the outside of the package and it should be sent to:

CANADA
SPYPOINT
330 Jacques-Cartier Street
Victoriaville, QC, G6T 1Y3

UNITED STATES
DISTRIBUTION CENTER
3000 Gannett Avenue
Des Moines, Iowa, 50321

The customer is held responsible for any loss or damage that may occur to the product during transport to SPYPOINT. It is recommended to use a shipping method that off ers a tracking number. This will help protect your shipment.

Frequency

FREQUENCY RANGE:
800/850/900/1900/2100 MHz

MAXIMUM TRANSMISSION POWER: