Page 4
The specifications and characteristics of similar models may vary. Refer to the website or packaging for details. PREPARATION SELECT A POWER SOURCE Three types of power sources are available to the user: 8 AA batteries inserted in the battery compartment. Alkaline or lithium batteries Make sure to insert the AA batteries according ...
Page 5
The camera was designed to draw its energy in the following priority order: • 12 V battery plugged in the 12 V camera socket. • AA batteries/lithium battery pack. For more information about the different power sources for your camera, please refer to the User Manual at www.spypoint.com/support.
• The card is inserted correctly when a click is heard. FORMAT YOUR SD CARD Before inserting the SD card in your camera, it must be fromatted to ensure proper operations. Visit www.spypoint/support if you need help formatting your SD card.
Page 7
CONFIGURATION Use the and buttons to navigate the menus and change options, the OK button to select and the BACK button to return to the previous menu. GENERAL SETTINGS SETUP 1. To turn the camera ON/OFF, press and hold the OK button. 2.
Page 8
COMPARISON OF HYBRID ILLUMINATION MODES * CONFIGURING THE SETTINGS FOR THE 3 OPERATING MODES From the home menu, select SETTINGS, then PHOTO, TIME-LAPSE, or VIDEO to access the respective mode configuration menu. HOME SETTINGS (Con guration) Photo Start camera Photo (Con guration) Time lapse Detection test...
Page 9
Multi-shot: Takes up to 6 consecutive shots at each detection with a 5 second delay between each photo. TIME-LAPSE Interval: This option allows the camera to take photos at regular preset intervals without movement detection. VIDEO Delay: Sets the time interval between each detection before the camera records the next video.
INSTALLING YOUR CAMERA MOUNTING BRACKET AND STRAP Install your camera against a tree, using either: 1. The strap and the mounting bracket together. 2. Only the strap inserted directly into the camera. When the camera is installed using the mounting bracket, it can be removed to access the battery compartment without disturbing the installation.
Page 11
INSTALLATION WITH THE SUPPLIED STRAP The dimensions of the included strap are 2.5 cm (1’’) X 152 cm (60’’). 1. Thread the strap through the strap slot found on the back of the camera. 2. Wrap the strap around the tree then press and hold down the latch.
Page 12
TESTING THE CAMERA’S MOTION DETECTION CAPABILITY The test light blinks when the HOME camera detects motion. If the Start camera system does not detect motion, Detection Test increase the detection sensiti- View vity using the “Sensitivity” option Settings in the SETTINGS/GENERAL menu. Adjust the camera’s position as needed.
Page 13
To ensure that you use your trail camera optimally and that it precisely meets your needs and ultimately to ensure greater success as a hunter, SPYPOINT offers you a range of useful additional digital features. For more details on the SPYPOINT EXPERIENCE, refer to the following website www.spypoint.com/en/spypoint-experience.
Page 14
DISPOSAL ONLY USE ORIGINAL SPARE PARTS AND ACCESSORIES. If, one day, your camera has been used so intensively that it has to be replaced, or if you no longer have any use for it, you are obliged to dispose of it at a recycling center. Information on return points for your electrical appliance can be obtained from your local waste disposal company or from your local administrative offices.
2-year warranty. We strive to provide our customers with a positive experience and an outstanding service. For a complete list of specifications, features, and settings, visit our FORCE-DARK page at www.spypoint.com. FAQ, User Manual & latest firmware available at www.spypoint.com/support Live chat support at www.spypoint.com...