Canyon Badian CNS-SW68 - Multifunstional Smartwatch Manual

GENERAL INFO

Canyon Badian CNS-SW68 is a smart watch with wireless connection to your smartphone through the Canyon Life app. Equipped with a stylish metal case, touchscreen Watch face, strap of hypoallergenic silicone and a large set of functions.

Models: CNS-SW68RR (dark red), CNS-SW68BB (black), CNS-SW68SS (white).

UNIT DESCRIPTION

The data obtained with the device are not medical indicators.

Features

Setting notifications, heart rate, blood pressure, oxygen saturation level, accelerometer, detailed activity statistics, optimization for popular sports, reminders for physical activity and drinking water, remote control player and smartphone camera, interchangeable dials, women's calendar, synchronization with Google Fit and Apple Health, weather, games.

Specifications

DC 5.0 V / 1.0 А, IP68, RAM 160 KB, ROM Flash 64 MB, 40 MHz, 7.5 dB (maximum), BT 5.0. Transmit power per channel: < 20.0 mW. Wireless connection range: 10 m. Weight: 50.6 g. Compatibility: Android 7.0 and above with Google Play Services, iOS 13.0 and above. Case: metal, Ø 44.9×10.9 mm. Strap: silicone, 20 mm. Screen: Touch screen, 1.28 inch, TFT 240×240 pixels, Colorful LCD. Battery: Lithium Polymer, 3.7 V, 190 mAh, non-removable. Full charge time: 3.5 hours. Operation time: in active use mode 4–6 days; in standby mode 13–16 days. Operating conditions: temperature 0...+35°C; humidity 5–95%. Storage conditions: temperature −10...+45°C; humidity 5–95%.

Delivery set

Smart watch Badian CNS-SW68, charging cable USB Type-A (length 50 cm), quick start guide.

EXTERIOR (see figures A, B)

1. Watch face.
2. Watch case.
3. Heart rate monitor.
4. Contact for charging.
5. Charging cable.

If you have any questions before returning your device to the store, please email us at support@canyon.eu or you can chat with us at the website canyon.eu/user-help-desk.

START OF USE

Charging

Charge the device before using it for the first time. To do this, connect it to the power supply as shown in figure C.

The output parameters of the power supply must not exceed 5.0 V / 1.0 A

Switching-on

Press and hold the device screen for 3–5 seconds until the watch face appears (see figure D).

Switching-off

While on the screen with the dial, swipe down. Select ("Settings"). On the menu that appears, press and confirm with ("Yes") (see figure E).

Installation and connection to Canyon Life

To make your watch and smartphone work together, install the free Canyon Life app. Scan the QR code to go to Google Play or the App Store. Next, activate BT on your smartphone, open the Canyon Life app, click "Connect BT Device". Place your watch and smartphone next to each other and press "Start". Select your watch from the list (Badian SW-68) and click "Add device". When you connect to the app, the watch automatically sets the current date and time.

Change the watch faces (see figure D)

While on the dial screen, press and hold your finger on the screen until the dial selection indicator appears. Swiping to the right or left, select the dial you like. Tap on the screen to set it. Detailed information is available in the full user manual.

Menu navigation

When you are on a screen with a dial, swipe down to go to the menu. In the menu data about the level of charge of the device and BT connection are available, as well as the buttons (see figure F):

"Theater" mode. Setting the minimum screen brightness and disable vibration

Vibration. Enable or disable vibration

Brightness. Changing the brightness level (5 levels)

Settings. List of additional functions

Weather. Weather forecast (need connection to the app)

For a full description of the applications, see the full user manual at canyon.eu/drivers-and-manuals

TROUBLESHOOTING

The watch does not turn on. Charge the device for a few minutes. If the watch does not charge, check the USB cable and charger.

The watch is not detected by the smartphone. Make sure that BT is activated on your smartphone. Make sure the watch is not connected to another smartphone.

Lost connection with smartphone. Give the application permission to run in the background and remove any restrictions.

REGULATIONS FOR SAFE USE

Do not press the screen with sharp objects or apply too much pressure. Do not disassemble or attempt to repair the unit yourself. Do not drop, throw or bend the device. To avoid injury, do not use a watch with cracks or other flaws. Clean with a dry or slightly damp cloth only after turning off the device and disconnecting it from the power supply.

WARRANTY TERMS

The warranty is 2 years from the date of purchase, unless otherwise specified by local law. The service life is 2 years. Additional warranty information is available on the web page canyon.eu/warrantyterms.

All information contained in this document is subject to change without prior notice to the user. For the latest information and details about the device, connection process, certifications, warranty and quality, and functionality of the Canyon Life app, see the relevant installation and operation manuals available at canyon.eu/driversand-manuals. All trademarks and trademarks are the property of their respective owners.

Directive 2014/53/EU on radio equipment. More information at canyon.eu/certificates.

Made in China.

Manufacturer: ASBISc Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101, Limassol, Cyprus. Tel.: +357-25-85-70-00, asbis.com.

Importer/distributor: ASBISc Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101, Limassol, Cyprus, asbis.com.