Depstech DS300 - Industrial Endoscope Manual

Introduction

Depstech® DS300 industrial endoscope was featured as a cost efficient industrial endoscope with 4.3" digital screen, which was invented to help car maintenance or pipeline repairing. We hope that you can use this efficient tool to enable you to finish the job more rapidly and help you discover the delights of miniature worlds.

To reduce greenhouse effects and to protect our forests, we choose a relatively small font to make the user manual.

We would recommend you:

Downloading The Multi-Language E-User Manual of your endoscope by logging into our: www.depstech.com
You can find the Navigation on the Top – Click into Endoscope – Click into Video Endoscope – Roll and choose Model Number: DS300 – Click Download Button for the E-User Manual
Any suggestions or customer service needs are warmly welcomed by us. Feel free to contact us via Email: support@depstech.com
Facebook Official Page: @DEPSTECH. FANS
Please remember to provide your Product Model No. And Order ID to us!
Thanks for your support again!

Quick Overview of Your New Endoscope

1. Power Button
   Hold this button for 2s to power on/off the endoscope.
2. Photo Shoot/Video Record Button
   Hold this button to start video record, single press to take a photo/end the video record.
3. "" Button
   Click to brighten the LED lights of the camera or move the cursor down.
4. "" Button
   Click to dim the LED lights of the camera or move the cursor up.
5. 180° Image Rotate Button
   Click to rotate the real-time image 180°;
   Hold this button to switch main/side camera. (For dual cam version only, support dual-cam mode, which can project the real time image of main/side camera at the same screen display)
6. OK/Play Button
   Click to confirm choices in the menu; Hold this button to enter/exited the album.
7. Menu Button
   Click to enter the menu for more settings.
8. Charging Status LED indicator
9. TF Card Slot
   Support up to 32G TF card. (The TF card has been inserted into the machine, please format it for the first time of usage)
10. Micro-USB Charging Port
    Charge the endoscope via Micro-USB cable.
11. Reset Button
    Short click the reset button with the reset pin to shut down the device.

*The package enclosed with TF Card (which has been inserted before shipping from the factory)/ Reset pin/ Micro-USB Charging Cable/ 3*Efficiency tools like magnet, hook and side mirror (Mirror for single camera version only)

FAQ

Q1: The image quality wasn't that good as advertised?
A1: Please adjust the length between the camera and the object that you're observing into the focal range. The focal range should be 1.96"~3.93" for single camera version, and 0.78"~3.14" in for dual camera version. Besides, it's essential to adjust the brightness of your endoscope for the best image quality. It will do a great help if you wipe the lens of the camera regularly after used.

Q2: The endoscope was failing to turn on?
A2: It might due to low battery status, especially in cold area. To release the low battery state you've to fully charge the endoscope. You can charge the endoscope for 4~5H and try to turn it on again.

Q3: The endoscope can not take a picture or record a video?
A3: First please make sure that the TF card has been inserted into the machine or not. Then make sure that you've formatted the TF card at the first use.

You can follow the steps below:

1. Short press menu
2. Short press "" button to remove the cursor down
3. Find and choose "Formate", then choose "OK".

Specifications