EDIFIER W800BT Plus - Bluetooth Stereo Headphones Manual

Button descriptions

Bluetooth pairing

• When the headphones are powered off, press and hold the multifunctional button for around 5 seconds, the red and blue lights flash rapidly.
• Search for and connect to "EDIFIER W800BT Plus", after pairing is successful, the blue light will flash slowly.

Note: When the headphones are powered on and not connected, press and hold the multifunctional button for around 2 seconds to enter Bluetooth pairing.

Restore to factory settings

When the earphones are powered on and not connected, press and hold the "+" and "-" buttons simultaneously for around 5 seconds until the blue light flashes rapidly to clear the pairing records. The settings of EDIFIER CONNECT APP would be reset meanwhile.

Note: Images are for illustrative purposes only and may differ from the actual product.

The Bluetooth^® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by EDIFIER is under license. Other trademarks and trade names are those of their respective owners.

Declaration for EU
Frequency Band: 2.402GHz ~ 2.480GHz
RF Power Output: ≤20 dBm (EIRP)
There is no restriction of use.

Input: 5V 1A

FCC ID: Z9G-EDF118
IC: 10004A-EDF118

Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong

www.edifier.com
© 2021 Edifier International Limited. All rights reserved.
Printed in China

NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.

Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails.

Model: EDF200040

IB-200-W800BP-01 V1.1

@Edifierglobal

@Edifier_Global

@Edifier_Global