EDIFIER W180T - True Wireless In-Ear Headphones Manual

EDIFIER W180T - True Wireless In-Ear Headphones Manual

Also See for W180T:

Advertisement

EDIFIER W180T - True Wireless In-Ear Headphones Manual

Power ON/OFF

Power ON/OFF

  1. Power ON when taken out of the case.
  2. Power OFF when placed in the case.

Pairing

Pairing

  1. Taken out of the case.
  2. Press and hold the touch panel on either earbud for 1-3s. Red and Blue LED will blink rapidly.
  3. Select "EDIFIER W180T L" or "EDIFIER W180T R" in your device setting to connect.

Pairing for the first time

  1. Taken out of the case. Red and Blue LED will blink rapidly.
  2. Select "EDIFIER W180T L" or "EDIFIER W180T R" in your device setting to connect.

warning Note:

  1. For subsequent use, the earbuds will auto-connect to device used last time.
  2. After you complete the Bluetooth pairing between the one earbud and the mobile phone, you can also repeat the above steps to pair the other earbud with the mobile phone to realize the operation of any single earbud.

Reset

Reset

  1. Taken out of the case.
  2. The earbuds are not connected and not connected with any Bluetooth devices.
  3. Respectively press and hold the touch panel on earbuds for 8s, Blue LED blinks 6 times rapidly and turn off, then the pairing record will be cleared.

Left & Right connection

Left & Right connection

  1. Taken out of the case.
  2. The earbuds are not connected and not connected with any Bluetooth devices.
  3. Quickly tap the touch panel on both earbuds 2 times and hold to wait until the blue LEDs blink rapidly, then left & right will start connecting. Blue LED will blink twice in 5s after connected.

Charge

Earbuds

  1. When hearing low battery prompt tone, please place the earbuds in the case for charging.
  2. Red LED is steady lit when charging and off when fully charged.

Charging case

  1. Please connect the case to power source with the included Type-C charging cable for charging.
  2. Red LED is steady lit when charging and off when fully charged.

Input:

5V 200mA(Earbuds)
5V 1A(Charging case)

Controls

Controls

warning Note:

  1. Please do not charge the product when there is sweat or other liquids inside the charging port, which may damage the product.
  2. Images are for illustrative purposes only and may differ from the actual product.

For more information, please visit our website: www.edifier.com


@Edifierglobal


@Edif ier_Global


@Edif ier_Global

Model: EDF2000725
Edif ier International Limited P.O. Box 6264

General Post Office
Hong Kong
www.edifier.com

warning NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download EDIFIER W180T - True Wireless In-Ear Headphones Manual

Advertisement

Need help?

Need help?

Do you have a question about the W180T and is the answer not in the manual?

Questions and answers

Table of Contents