EDIFIER WH500 - Wireless On-Ear Headphones Manual

Power ON/OFF

Pairing

1. When they're power off, press and hold the power button for 6s. The status light blinks blue.
2. Select "EDIFIER WH500" in your device setting to connect.

1st Pairing

1. Once the headphones are power on, they will enter Bluetooth pairing automatically. The status light blinks blue.
2. Select "EDIFIER WH500" in your device setting to connect.

Note:

1. For subsequent use, the headphones will auto-connect to device used last time.
2. Dual-Device Connection: After connected to a device, restart and enter Bluetooth pairing to connect the second device. Then manually re-pair the headphones again from the first device to complete Dual-Device connection.

1. When the headphones are power on, press and hold the "" and " " at the same time for 6s.
2. The status light blinks white until reset is completed.
3. Once the headphones are reset, they enter pairing mode automatically.

For more information, please visit our website:

www.edifier.com

@Edifierglobal

@Edifier_Global

@Edifier_Global

Model: EDF200117

Edifier International Limited

P.O. Box 6264

General Post Office

Hong Kong

www.edifier.com

2023 Edifier International Limited. All rights reserved. Printed in China

NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly different from actual product.
If any difference is found, the actual product prevails.