Insignia NS-CAHBTOE01, NS-CAHBTOE01-C - Headphones Quick Setup Guide

PACKAGE CONTENTS

• Bluetooth over-the-ear headphones
• USB charging cable
• 3.5 mm audio cable
• Quick Setup Guide

FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, enter your model in the search box, then press ENTER. Next to Features, click Support & Downloads, then next to User Guide, click the language you want.

FEATURES

• Comfortable foam earpads
• Volume control
• Listen to music and talk on the phone wirelessly
• Music playback: 10 hours
• Echo cancellation and noise suppression
• Voice prompts and easy pairing
• High quality sound

Before using your new product, please read these instructions to prevent any damage.

#	DESCRIPTION	FUNCTION
1	+ Volume Up	Press + to increase the volume.
2	(Power/Talk/ Play/Pause/ Pairing) button	Press to turn on your stereo headphones. If you receive a phone call, press to talk. Press to pair your headphones with a Bluetooth enabled device.
3	Next Track Previous Track	Press to skip to the previous track/fast rewind. Press to skip to the next track/fast forward.
4	– Volume Down	Press – to decrease the volume.
5	Indicator LED	Shows current status of the headphones.
6	Microphone	Allows you to talk on the telephone.
7	3.5 mm audio jack	Connect one end of the included audio cable to the headset' s audio jack and the other end to the music devices headphone jack
8	Micro USB port	Plug the micro USB connector into this port to charge your headphones.

BLUETOOTH BASIC INDICATION

Bluetooth function indication

ACTION	OPERATION	LED INDICATION	SOUND
Power on	Press and hold more than two seconds	Blue LED lights for 1.5 seconds	"power on"
Power off	Press and hold more than three seconds	Red LED lights for 1.5 seconds	"power off"
Pairing mode	Press and hold more than four seconds in power off mode	Blue and red LED blinking alternately	Two short beeps
Play/Pause	Press and release button
Volume Up/Down	Press and release + / - button		Two high beeps for maximum volume
Previous Track/Next Track	Press and release button
Fast Rewind/Fast Forward	Press and hold button
Incoming call		Blue LED blinks three times every five seconds when a call is received	Ring tone
Answer call	Press and release when a call is incoming		One long beep
Reject call	Press and hold when a call is incoming		Two long beeps
Redial	Double press		Two short beeps
Reset device list	Long press button more than five seconds in power off mode	Red LED flashes 10 times

CHARGING YOUR STEREO HEADPHONES

• When the red indicator LED blinks three times every minute and the voice prompt says "battery low", the battery is low. To charge the battery, plug the charging cable into your computer and into the microUSB port on your headphones. The red LED turns on to indicate that the battery is charging and turns off when fully charged.

USING WITH THE AUDIO CABLE

You can use your headset with non-Bluetooth enabled devices or on airplanes (in which the use of Bluetooth may be restricted) by taking advantage of the headset' s audio jack. Corded operation does not require battery power for music listening. The microphone and the FullSound digital sound enhancement will not work via the audio cable.
Note: Finish your call before connecting the audio jack, as this will switch off battery power and cut an ongoing call.

USING YOUR STEREO HEADPHONES

Turning your stereo headphones on and off

1. Place the headphones on your head.
2. Press and hold the button more than two seconds. The LED blinks blue (when turned on) or red (when turned off) and the voice prompt says "Power on" or "Power off".

PAIRING YOUR STEREO HEADPHONES

Notes:

• Range is 33 feet (10 meters)
• Supports easy pairing
• Prompts you by saying "Your device is connected," when connected
• Supports a battery indicator icon on an iOS device

Pairing with a cell phone or MP3 player

1. With your stereo headphones turned off, press and hold for four seconds. The blue and red LEDs blink alternately.
2. On your phone or MP3 player, select INSIGNIA NS-CAHBTOE01 from the list of discovered devices, then enter the password 0000 (four zeros) (if required) to pair your headphones.

For more information on pairing Bluetooth devices to your cell phone or MP3 player, see the device's documentation.

Note: After the headphones have been successfully paired with the cell phone or MP3 player, the headphones will automatically reconnect to the phone or MP3 player.

Pairing with a computer running Windows

Note: Before you pair the headphones with the computer, make sure that the computer is equipped with Bluetooth. Refer to the computer's documentation or contact the computer manufacturer for more information. If your computer is not Bluetooth compatible, install a Bluetooth USB adapter (dongle).

1. Turn on Bluetooth on the computer. For instructions, see the computer's documentation or contact the computer manufacturer.
2. Double-click the Bluetooth icon in the system tray, then click Add a device (Add Wireless Device using Windows Vista).
3. With the headphones turned off, press and hold for four seconds. The LED blinks blue and red alternately. Pairing mode is activated.
4. Double-click the INSIGNIA NS-CAHBTOE01 icon on the computer or highlight the icon, then click Next.
   Note: If you are unable to locate the INSIGNIA NS-CAHBTOE01 icon, click the Search Again button.
5. If required, enter 0000 (four zeros) in the Bluetooth security code field, then click Next.
6. After the headphones have been paired, click Close.
   Note: To make your headphone the default playback device, refer to the User Guide.

Pairing with a Mac computer

Note: Before you pair the headphones with the computer, make sure that the computer is Bluetooth compatible. Refer to the computer's documentation or contact the computer manufacturer for more information. If your computer is not Bluetooth compatible, install a Bluetooth USB adapter (dongle).

1. Turn on Bluetooth on the computer. For instructions, see the computer's documentation or contact the computer manufacturer.
2. Click the Bluetooth status menu.
3. Click Set up Bluetooth Device. The Bluetooth Setup Assistant opens.
4. Click Continue.
5. Select Headset as the device type, then click Continue.
6. With the headphones turned off, press and hold for four seconds. The LED blinks blue and red alternately. Pairing mode is activated.
7. Select INSIGNIA NS-CAHBTOE01, then click Continue. The computer gathers information.
8. Click Continue.
9. Enter 0000 (four zeros) into the Passkey field, then click Continue.
10. Click Quit to finish.
    Note: To use the headphones, they must be selected as the default input and output device on the computer.
11. Click System Preferences, then click Sound.
12. Under Input, select INSIGNIA NS-CAHBTOE01, then under Output, select INSIGNIA NS-CAHBTOE01.

For more information on using your headphones with Skype, refer to your User Guide.

RESETTING YOUR STEREO HEADPHONES

• To reset your headphones, with your stereo headphones turned off, press and hold the power button for five seconds. The LED blinks red ten times, indicating that your headphones have entered pairing mode.

SPECIFICATIONS

TROUBLESHOOTING

• Reset your BT headphone
• Plug in the micro USB cable for charging

CONTACT INSIGNIA:
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
IINSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.