Insignia NS-CAHBT02-BK Quick Setup Manual

Final flat size: 419.1 × 139.7 mm
Final fold size: 69.85 × 139.7 mm
PACKAGE CONTENTS
• Bluetooth over-the-ear headphone
• USB charging cable
• Foam ear pads
• Quick Setup Guide
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, then
click Support & Service.
Enter NS-CAHBT02 in the box under
Manual, Firmware, Drivers & Product
Information, then click ►.
FEATURES
• Sweatproof earpads for sports use
• Comfortable foam earpads included
• Reflective headband
• Volume control
• Listen to music and talk on the phone
CHARGING YOUR STEREO
wirelessly. Music playback: 10 hours
• Echo cancellation and noise suppression
HEADPHONES
• Voice prompts and easy pairing
• When the red indicator LED blinks three times a
• High quality sound
second, the battery is
plug the microUSB charging cable into your
computer and into the microUSB port on your
headphones. The red LED turns on to indicate
that the battery is charging and turns off when
Before using your new product, please read fully charged.
these instructions to prevent any damage.
# DESCRIPTION FUNCTION
1 +/- Volume Up Press + to increase the volume.
Volume Down Press - to decrease the volume.
2 Reflective strip Provides extra safety in low-light
conditions.
3 Indicator LED Shows current status of the headphones.
4 (Power/Talk/ Press to turn on your stereo
Play/Pause/ headphones. If you receive a phone
Pairing) button call, press to talk.
5 Microphone Allows you to talk on the telephone.
6 / Press to skip to the next
Next Track track/fast forward.
Previous Track Press to skip to the previous
track/fast rewind.
7 Micro USB port Plug the micro USB connector into
this port to charge your headphones.
USING YOUR STEREO
HEADPHONES
Turning your stereo headphones on and off
low. To charge the battery, 1 Place the headphones around your neck.
2 Press and hold the button for three seconds.
The LED blinks blue (when turned on) or red
(when turned off) and the voice prompt says
"Power on", or "Power off. "
BLUETOOTH BASIC INDICATION
Bluetooth function indication
ACTION OPERATION LED INDICATION
Power on Press and hold more than two seconds Blue LED lights for 1.5 seconds
Power off Press and hold more than three seconds Red LED lights for 1.5 seconds
Pairing mode Press and hold more than four seconds in Blue and red LED blinking
power off mode alternately
Play/Pause Press and release button
Volume Up/Down Press and release + / - button
Next Track/Previous Track Press and release / button
Fast Forward/Fast Rewind Press and hold / button
Incoming call Blue LED blinks three times every
five seconds when a call is received
Answer call Press and release when a call is incoming
Reject call Press and hold when a call is incoming
Redial Double press
Reset device list Long press button more than All LEDs turn off
10 seconds in power off mode
Quick Setup Guide |
NS-CAHBT02-BL/NS-CAHBT02-BK
Bluetooth Over-the-Ear Headphone
PAIRING YOUR STEREO
HEADPHONES
Notes:
SOUND
• Range is 33 feet (10 meters)
"power on"
• Supports easy pairing
"power off" • Prompts you by saying "Device Connected, " when
connected
Two short beeps
• Supports a battery indicator icon on an iOS device
Pairing with a cell phone or MP3 player
Two high beeps for maximum
1 With your stereo headphones turned off,
volume. Two low beeps for
press and hold for four seconds. The blue
minimum volume
and red LEDs blink alternately.
2 On your phone or MP3 player, select
INSIGNIA NS-CAHBT02 from the list of
discovered devices, then enter the password
Ring tone
0000 (four zeros) (if required) to pair your
One short beep headphones.
For more information on pairing Bluetooth
One long beep
devices to your cell phone or MP3 player, see
Two short beeps
the device's documentation.
Note: After the headphones have been successfully
paired with the cell phone or MP3 player, the
headphones will automatically reconnect to the
phone or MP3 player.
v1
R2