Advertisement
iNSTRUCTiONS
FOR SINGLE SUSPENSION
BRACKET
TRACTORS
STEP 1:
(SEE FIGURE
2)
*
Open parts bag labelled "A" and verify that all parts
are present.
NOTE: Place cardboard or a mat on work surface to prevent
scratching of parts removed from carton and tractor.
HARDWARE SHOWN FULL SiZE
EXCEPT WHERE NOTED
(not full size)
PARTS BAG "A"
STEP 2:
(SEE FIGURE 3)
•
Remove tractor hood. (Refer to tractor manual.)
Remove the browning shield as shown.
FIGURE 2
Ref.
Part
Qty. Description
A
43350
4
Carriage Bolt, 3/8-16 x 1"
B
44072
4
Whizlock Nut, 3/8"
C
R19171616
4
Washer, 1/2"xl"
D
47674
4
Plug
66460
1
Bumper
REMOVE
BROWNING SHIELD
REMOVE
FRONT SCREWS
FIGURE
3
STEP 3:
(SEE FIGURE 4)
Place plug on a work bench or solid table and push
end of bumper down onto plug. Repeat for remaining
plugs.
BUMPER
PUSH DOWN
WiTH EVEN
PRESSURE
WORK BENCH
OR SOLID TABLE
I
STEP 4:
(SEE FIGURE 5)
Place a washer onto a carriage bolt and then insert
the bolt into the second mounting hole from the front
of the tractor frame. Securely tighten a whizlock nut
onto the bolt on the outside of the tractor frame.
Repeat on other side of tractor.
Call 1-866-576-8388
for missing parts or assembly help
DO NOT RETURN TO STORE
CARRIAGE BOLT
AND WASHER
\
WHIZLOCK
NUT
FIGURE 5
3
Advertisement
