Advertisement
STEP 5:
(SEE FIGURE 6)
*
Spread ends of bumper enough to fit slots onto bolts
in rear mounting holes in tractor frame.
*
The bumper has three mounting holes. The rear
holes provide the most clearance while the forward
holes provide a neater appearance. Use a hole that
provides enough clearance for the hood to stay in
raised position when opened. Place a washer onto
a carriage bolt and insert the bolt through the tractor
frame and into desired mounting hole on each side of
bumper. Secure with a whizlock nut.
iMPORTANT:
Before fully tightening nuts, be sure
tractor hood will stay in raised position when opened.
CARRIAGE
BOLT
AND WASHER
WHIZLOCK
NUT
FIGURE 6
STEP 6: (SEE FIGURE
7)
*
Replace the browning shield using the front screws
you removed in Step 2.
REPLACE
FRONT SCREWS
REPLACE
BROWNING SHIELD
FIGURE
7
4
Call 1-866-576-8388
for missing parts or assembly help
DO NOT RETURN TO STORE
Advertisement
