Advertisement
STEP 3:
(SEE FIGURE 4)
*
Place plug on a work bench or solid table and push
end of bumper down onto plug. Repeat for remaining
plugs.
BUMPER
PUSH DOWN
WITH EVEN
PRESSURE
WORK BENCH
OR SOLID TABLE
I
SHORT STEP
,_'_
PLUG (E)
_-_
FIGURE4
STEP 4:
(SEE FIGURE 5)
*
Remove any bolts present in front mounting holes in
side of tractor frame. If bolt will not screw out of hole,
check if a nut is present on bolt on inside of frame.
On GT tractors, if access to nut is blocked by a front
mounted muffler, slide muffler down exhaust tubes to
rest on top of browning shield.
iMPORTANT:
Be sure to re-attach muffler and heat
shield after bumper is installed.
•
If rear mounting holes in tractor frame are empty,
install hex bolts and whizlock nuts supplied in the
parts bags. See figure 5.
(LT) LAWN TRACTOR
REMOVE BOLT
iNSTALL (C), (D) IF
iF PRESENT
HOLE iS EMPTY
SUSPENSION BRACKET
/
(LT) LAWN TRACTOR
REMOVE BOLT
INSTALL (C), (D) IF
IF PRESENT
HOLE IS EMPTY
SUSPENSION
BRACKET
(GT) GARDEN
TRACTOR
EXHAUSTTUBES
MUFFLER
BROWNING SHIELD
/
SUSPENSION
BRACKET
\/
REMOVE BOLT
IF PRESENT
FIGURE 5
6
Call 1-866-576-8388
for missing parts or assembly help
DO NOT RETURN TO STORE
Advertisement
