Single Sheets - TallyGenicom SprintPro 2265+ Quick Start Manual

Quick start guide

Single sheets

Some printer models are designed for fanfold paper operation only and therefore do not fea-
ture a single sheet feeder. The front cover can therefore not be opened on these models.
Make sure that the printer is set to single sheet mode. If
necessary, change the paper type (see page 15, Changing the
paper type).
Press the latch at the middle of the front cover. The single sheet
input tray opens downwards.
Align the left paper guide with the mark on the left of the single
sheet input tray. Adjust the right paper guide to the width of the
paper used.
Paper handling
19