Quick start guide
Changing the
Before opening the cover, make sure that the printer is switched on so that it can execute
ribbon cassette
automatic preparations for ribbon changing (widening the print head gap).
During the process of initialization after powering on, the printer checks if a ribbon cassette
is installed. It also checks during the execution of a print job the operativeness of the ribbon
cassette. These functions mandatory require the use of the manufacturers original ribbon cas-
settes (see section Accessories, page 27). If other ribbon cassettes were used, the message
"Check Ribbon" appears in the display, it is impossible to print.
Changing the ribbon cassette
Move the paper to the park position.
Open the printer top cover.
9