Advertisement
49.
Attach other Front and Side Facia to opposite corner as per Step 48.
50.
Attach 4S - Front Facia - Center to rafter ends as shown above. Small gaps may occur between the
Center and Left/Right Facia, but these will be covered by Facia Detail Plates in Step 52. Attach with
2 - 1 1/2" Finishing Nails per rafter end.
51.
Attach 4R & 4S - Rear Facia onto rafter ends as per Steps 48 - 50. Small gaps may occur between
the Center and Left/Right Facia, these will be covered by Facia Detail Plates in Step 52. Rear Facia will
cap the side Facia. Attach Rear Facia to rafter ends with 2 - 1 1/2" Finishing Nails per rafter end.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 32
Small gaps may occur.
Small gaps may occur.
Rear Facia caps
Side Facia.
sales@outdoorlivingtoday.com
Advertisement
