Advertisement
47.
Attach 4P - Rear Middle Trims where wall
panels come together at rear seam. Attach with
8 - 1 1/2" Finishing Nails aligning tight
underneath soffit and center on seam.
Facia Nailing Strip
Front
Facia
48.
Locate one 4Q - Side Facia and one 4R -
Front Facia and align in front corner. Position facias underneath
roof panel, doing a dry run first before securing. Front Facia
goes against rafter ends and Side Facia goes against Facia
Nailing Strip. Align so the Front Facia caps the Side Facia.
Attach Front Facia with
2 - 1 1/2" Finishing Nails per rafter end. Attach Side Facia to
the Facia Nailing Strip with 5 - 1 1/2" Finishing Nails.
Toll Free 1-888-658-1658
4P - Rear Middle Trim
(1/2" x 2 1/2" x 88 3/4") x 2
Side Facia
- Angle Cut
www.outdoorlivingtoday.com
Page 31
Parts
N1 - 1 1/2" Finishing Nails
Front Facia
caps Side Facia
Parts (Steps 48 - 51)
4Q - Side Facia - Angle Cut Ends
(1/2" x 5 1/2" x 54 1/8") x 2
4R - Front & Rear Facia - L/R
(1/2" x 5 1/2" x 50 1/2") x 4
4S - Front & Rear Facia - Center
(1/2" x 5 1/2" x 45 1/2") x 2
Hardware (Steps 48 - 51)
N1 - 1 1/2" Finishing Nails x 46 total
sales@outdoorlivingtoday.com
Hardware
x 16 total
Advertisement
