Advertisement
Door Header
overhangs
inside wall
framing by 1/2"
14.
Position 2D - Door Header - Short on top
of wall stud so it is flush on the outside with the
wall siding. Attach by screwing down into top wall
framing with 3 - 3" Screws.
15.
Attach 2D - Door Header - Short to other side. Position and attach 2E - Door Header - Long
between short door headers. The Long Door Header has an aluminum strip attached to the back for added
support. Attach by screwing down into wall framing with 2 - 3" Screws per side. Fasten aluminum strip to
short headers with 2 - 1 1/4" Screws per side.
Toll Free 1-888-658-1658
Step to front
and top.
Align flush
outside with
wall siding.
Parts (Step 14 - 15)
2D - Door Headers - Short
(2" x 3 1/2" x 26 1/4") x 2
2E - Door Header - Long
(2" x 3 1/2" x 84") x 1
www.outdoorlivingtoday.com
Page 13
Hardware (Step 14 - 15)
S2 - 1 1/4" Screws
Aluminum strip on back
of Long Door Header
sales@outdoorlivingtoday.com
S4 - 3" Screws
x 10 total
x 4 total
Advertisement
