Advertisement
40.
Position 4E - Aluminum Door Tracks on bottom of Front Soffits,
spaced approximately 3/8" from Door Header. 4Y - Extra Piece Lap Siding
can be used as a spacer for track. Tracks should meet at the center of the
door opening below middle rafter. Attach with 8 - 1 1/4" Screws per track.
Note: Aluminum track has pre-drilled
holes for screws which do not line
up with rafter ends.
Toll Free 1-888-658-1658
A wood clamp may be helpful
to hold the track in place while
attaching to Soffit.
www.outdoorlivingtoday.com
Page 25
Front Soffit
Door
3/8"
Header
3/8" Gap between Track and Door
Header. Extra piece of lap siding
can be used as a spacer.
Parts
4E - Aluminum Door Track
x 2
Hardware
S2 - 1 1/4" Screws x 16 total
Tracks meet
in the middle
sales@outdoorlivingtoday.com
Advertisement
